20 Most Recent OKI B4350 Laser Printer - Page 3 Questions & Answers

You need to reset the drum count. take the printer offline by pressing the online button. next scroll down on the menu button til you get to Maint. Menu. Next press Item+ button 2 times. LCD should say Drum count reset. next press select button.this will save the option. next press online button
to put the printer back online. you should be ok to print

Good Luck

When you change the drum you must reset the drum count.
1: press ONLINE button once. The lcd display will read offline.
2: press MENU button until the lcd display reads MAINT. Menu.
3: press ITEM+ button twice. The lcd display will read drum count reset.
4: press SELECT button once. this will save the drum count reset.
5: press ONLINE button once. You will notice the Change Drum Message
has disappeared. You should be able to print at this time.

Good Luck

The Head is the Black ber on the uder side of the top cover. Use a tissue to wipe off any excess toner. You can use a small amount of alcohol on the tissue to than wipe dry. If you have a 3M toner
vacuum you can vac. up any dust or toner on the drum. DO NOT use any liquids on the drum.

Good Luck

Some drum units are "chipped" to prevent the rebuilding of of them and it's possible yours is one of these. Removing the drum, once installed, may have triggered this error message. Try emailing Oki about this; in the past they were pretty good about responding to customer problems while I was still involved with servicing these and other printers.

The error code 002 is a vague problem, but mostly leads to replacing the motherboard. Would probably be cheaper to buy a new printer than to replace the motherboard for this printer.

On some printers after you change the drum, you have to reset the counter so the printer knows the drum has been changed. How to reset the counter is as follows:
1. press the ONLINE button to return the printer to off line status.
2. press the MENU button repeatedly until the MAINTENANCE MENU is desplayed, then press the SELECT button.
3. Press the item button until DRUM COUNT RESET is displayed.
4. Press the SELECT button and the Drum Counter is reset.

Hope this helps.

Jam may not be completely cleared or paper is not suitable for your printer.

You can find your User Guide, an Educational Guide on the paper which is compatible with your printer and updated Drivers here:

http://my.okidata.com/PP-B4350.nsf?opendatabase

In the Troubleshooting section of the User Guide (page 74 of the English version) there is a section on dealing with Paper Jams. Make sure you have cleared all areas and that your paper is compatible.

Trust this is helpful. Please vote.

Your printer is telling you it needs a new drum. Go to a search engine (Google or similar) and type:

oki b4350 drum

The results will show you where you can purchase a replacement. They look to be priced between £115 and £160. The replacement should have instructions on how to fit it.

Best of luck.

Estan incluido en el system Windows 7:

Seg?n Windows 7 Centro de la Compatibilidad, impresora de Oki B4350 es compatible con Windows 7 versi?n x64. Si el asunto persiste, puede intentar de instalar al conductor de la Actualizaci?n de Windows para hacer clic aqu? :

http://catalog.update.microsoft.com/v7/site/Install.aspx?q=Oki B4350&referringpage=Search.aspx

Tambi?n, es recomendado contactando Oki para verificar directamente este asunto.

Adem?s, va por favor al Tablero de control -> Dispositivos e Impresoras -> el derecho hace clic en la impresora y entonces clic Localiza fallas para ver si el asunto puede ser resuelto.

Buenas Suerte,

Jose Diaz

I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

There are two ways paper can come out. Just enter/insert/ push in the tray from the back of the printer.
If you need further assistance leave a comment. Cheers

Hi there maximum time we found it is a the head problem. The print head is what the cartridges sit in inside of the printer. For resolve the problem please follow these.

Open the printer and wait for the carriage to slide over. Some how if its not come then Unplug the printer & Manually slide the carriage.
Now Remove the ink cartridges from the printer head & Use wet warm cotton swab or use alcohol to thoroughly clean the print head.
Repeat this until there is no ink residue coming off on the cotton swab. After finished it make the head dry then fix it back. Now Try to print something now
If that does not work then follow the next step.

Remove the printer data cable & restart the PC & printer. Then fit back the data cable & turn on the printer. Hope that's start working , if no luck then Uninstall the printer driver & restart the PC & Printer both again. Now install the driver of the printer and connect it with PC ,Turn on printer & go for a test print from the printer preference. Thanks & waiting for your reply.
___

Hi,
Visit to the given link. http://www.c5100n.co.uk/index.asp?printername=C5100n&menumode=0&content=errorcodes
If the error code you're looking for is not in the table (in above link) then send an email to [email protected] and we will find out what it means...

Hope this has helped you...
thanks....

the lazer units can be ezchanged for new/recharged ones

After pushing the on button, RAM CHK- initializing-- on-line - auto, and then, over and over and over again. It just goes in a circle.Pardon my english. Denmark is calling :-)