Nikon COOLPIX S1100pj Digital Camera - Answered Questions & Fixed issues

Try switching the button back and forth located on one side of the card several times to unlock the the sd card, sometimes switch contacts become dirty.

You can view/download the manual from the manufacturer's web site at
http://support.nikonusa.com/app/answers/detail/a_id/16561

i would try to do a hard reset of some sort and if that doesnt work take it back and have the place you bought it at exchange it for another one.

Question edited for clarity. Question moved from Cars and Trucks category. Question translated to English. We only speak English on Fixya. New Button board needed. https://www.google.com/search?q=nikon+coolpix+s2500+repair ..

Question edited for full 'make model (what it is)'. Question moved to Model Series category. Take it to a Nikon Service Centre, it will likely be the sensor. https://www.google.com/search?q=nikon+repairs+near+me Others have reported colour balance issue. https://www.google.com/search?q=Nikon+s7000+view+screen+is+a+magenta+color ..

Hello again There is one repair place that lists 700 different battery doors, but your is listed and out of stock. AliExpress also lists doors and sometimes they end up on eBay. Your best bet is Nikon direct. https://www.google.com/search?q=replacement+battery+cover+door+for+a+Nikon+Coolpix+s7c ..

It appears the model has a recall of sorts. Your needs professional repair. https://www.nikonusa.com/en/service-and-support/service-advisories/coolpix-3100-3500-4500-5000-5400-5700-and-sq-service-advisory.html https://www.google.com/search?q=Nikon+e5700+cool+pix+service ..

Nikon Service Centre for that issue.

COOLPIX S3000 ' Nikon

https://www.nikonusa.com > compact-digital-cameras Electronic VR Image Stabilization minimizes the effect of camera shake · Motion Detection automatically detects moving subjects and adjusts shutter speed and ISO ... ..

contact NIKON perhaps they can repair it we can not

At the Time the Camera was made , Nikon lists a number of compatible memory cards. Each year both cameras and cards can read and write data faster. Cheap cards today can be read much faster than written. If any camera can take many photos in a short time, a slow cad will not allow the camera to operate as intended.

I cant understand your question,please explain your problem clearly

Some Modes, Like FIREWORK will not allow Flash. Check your MODE

Go to Nikon.com and search for your camera and then look for Memory cards that are compatible

It flashes green when it is basically on but in a sub mode that I'll call CHARGE MODE. If it is flashing that means the battery is charging. I suggest to let it continue to charge until it stops flashing and then remove the charger connection. When the camera is sitting all by itself with nothing connected you can then turn it on.

Is it the screen, or the screen protector ? If the latter, just remove it and replace it. If it is the actual screen, first of all try a lint-free cloth barely dampened with distilled water, and test it on a corner, see if that works. On no account get the camera wet. If that is unsuccessful, try adding a very little diluted washing-up liquid, and try again. Should that not succeed, I would advise taking the camera to your local repair facility for their expert advice.

Not sure exactly what the issue is here - could you be more specific please ? Thank you.

I would suggest you go to the Nikon support site and see if there is a version you can download from there.

Did you try another battery? This one is probably old and doesn't hold charge.

Are you inserting the battery in the correct direction?

Hi Here are some suggestions to try and see where the problem may be: 1. Have you tried to charge the battery? We would suggest trying different USB sources (e.g. a USB port on a computer as well as the Nikon supplied AC adapter) 2. Could the battery be dead? If you have tried to charge the battery in the camera via USB then there is a chance the battery is dead and needs replacing. If the camera had not been used for a long time and the battery was stored with little or no charge, the battery may now be un-chargeable. 3. If the camera has been left unused for a long time the internal battery that keeps the time/date may have discharged. You need to be able to set the time/date before the battery can be charged. If you plug the camera into a USB power source and you can see the menu on the LCD then set the date/time. We hope these suggestions help to get the camera back up and running