Whirlpool DU1010XTX Builtin Dishwasher - Page 4 - Answered Questions & Fixed issues

It is always helpful to list the model number. Here are some generic fixes: https://producthelp.whirlpool.com/Dishwashers/Product_Info/Dishwasher_Product_Assistance/Dishwasher_Not_Starting_or_Not_Operating https://housemethod.com/maintenance/dishwasher-wont-start/ You might check YouTube if the problem is narrowed to a fuse replacement for the whirlpool dishwasher. There is a $15 repair there.

REPAIR PEOPLE NEVER ASSUME ANYTHING , WE TEST IT

1. Defective valve 2. Incorrect installation

Could be a faulty cycle timer

Request the manual from Whirlpool.

Could be a defective cycle timer, rather than the pump

either full water sensor bad or water solenoid stuck open

The connector ribbon cable oxidizes connecting the keypad, replace the keypad!

When the dishwasher starts to make funny noises or working loudly, it is usually because there are debris caught in the draining pump, although a problem with the motor is also possible.Drain Pump: The drain pump might needs to be checked for debris. If its clean and noisy it needs to be replaced.Circulation Pump: Bearings inside the circulation pump will wear out over time and can cause a loud groaning sound while the dishwasher operates.Wash Impeller: The wash impeller has small plastic blades that help with water flow to the control arms. If one of the blades breaks there could be a noise. It may also be improperly aligned. Inspect for any signs of damage.Source: https://www.electrafixbc.ca/appliances/dishwasher.html

https://www.youtube.com/watch?v=eUD0HMC0OvI https://www.hunker.com/13407814/what-causes-a-whirlpool-dishwasher-to-have-a-flashing-light

https://www.youtube.com/watch?v=EQmpLMAsi8g https://www.youtube.com/watch?v=5uSP2Kje8pQ

https://www.youtube.com/watch?v=l8GFXlVGY-8

All dishwashers are "tall' now. But will fit under counters wiring diagrams are glued to the inside of the panels

Video at the link below suggests it may have a locking feature: https://m.youtube.com/watch?v=XAauYps8k5E

Where is it leaking from? It'd it is under the door, check the door gasket for tears.

i don't know. as it is new, i would call the seller or the manufaturer to see if this a normal condition or if a free service call is necessary.

Replace it with new.

cycle timer. Mine wouldn't shut if timer were in the wrong place.

check pump clean strainer

Please check your normal water supply it's above 35'c no need to contact any component