20 Most Recent Whirlpool DU1010XTX Builtin Dishwasher - Page 8 Questions & Answers


Kungfuj3sus:

Thank you for your review.

We would like to inquire further about your review with you. Please respond back to this email address, [email protected], with your name, phone number, street address, zip code, model & serial number, and date of purchase on the appliance.


We look forward to your reply.
Thank you,
Whirlpool® Social Media Relations

Whirlpool... | Answered on Mar 09, 2018


You may have power, however if a circuit board fails, all the power in the world won't start the washer. You need a technician to test the circuit for internal damage.

Whirlpool... | Answered on Feb 17, 2018


measure the gap you have to fix a dish washer in and see what model they have of the same size to fit your needs .

Whirlpool... | Answered on Feb 17, 2018


Sounds like the anti flood alarm has activated - may be a small leak from the door or the sump into the base tray. You need to drain the tray, fix the leak and test. Try cleaning the door gasket and part of the door it seals against.

Whirlpool... | Answered on Feb 04, 2018


Make sure the top spray arm is turning! check for blockage in the jets at the very end of the spray arm, or that the spray arm has not split. Put the arm in a known position, and check it has moved after a few moments. Remove blockages or replace the arm if necessary.
These machines dry only by the last rinse being in hot water, then the plates drip dry. Are you using rinse aid? this helps the water to disperse without spots.

Whirlpool... | Answered on Feb 04, 2018


Assuming the machine fills and drains water ok, and is heating the water too, and you can hear the circulation pump running during the wash, the most likely problem is blocked jets in the spray arms. You have to remember that a dishwasher is NOT a garbage disposal unit, and plates must be scraped clean before they are put into the machine for a wash. Bits of uneaten food in the machine will clog the filters, coat the walls of the machine and work their way into the spray arm jets especially at the very ends. These end jets are the only reason the jets rotate, and if blocked the arm just sits still and poor washing results. Remove and / or examine the ends of the spray arms carefully - often fruit pips or pasta can be seen blocking the jets. Remove this with a pin and running water. Also then run a dishwasher cleaner through the machine, with No load in - do this regularly to reduce blockages and smells.
spray arms can be taken to pieces in most cases to clear blockages. Always use a top quality detergent in the wash for best results.

Whirlpool... | Answered on Feb 04, 2018

Not finding what you are looking for?
Whirlpool DU1010XTX Builtin Dishwasher Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Whirlpool Dishwashers Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Mike

Level 3 Expert

4372 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Whirlpool Dishwasher Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Whirlpool Dishwashers

  • Whirlpool Dishwashers

Most Popular Question

quiet partnr 1 diswasher new installed

  • Dishwashers
Loading...