20 Most Recent Pioneer PRO-99 TV - Page 9 Questions & Answers


(-) R is the industry standard, (+) R is Sony standard, suggest you stick with (-)

Pioneer... • Answered on Nov 29, 2017


It can be but with its age it may not be worth the cost to repair, almost all repairs cost $100 or more

Pioneer... • Answered on Nov 29, 2017


First make sure the belts are all in good shape and not stretched, also verify the laser reader is working. These are not repaired because replacement with new is very cheap.

Pioneer... • Answered on Oct 31, 2017


hi,
u cam reset ur only by the following way.

p { margin-bottom: 0.21cm; }

In order to enter Service Mode, TV guide must be turned off

In order to do this procedure you must have and use the correct remote. The full function remote that

came with the set has a TV Guide Logo in a red box. This is the remote you should use.


NOTE: If TV guide has not yet been setup, then the 1st step is to follow instructions to set TV guide up.

Enter ZIP code, cable or ant. Etc.



1.press and release the "TV Guide". TV guide will appear on the screen.

2.Navigate to the TV Guide tool bar and use the ">" button to select "setup" in the menu and press

and release the "enter" button

3.use the "arrow down" button to select "default options"

4.press and release the "enter" button and select "general defaults"

5.press and release the "enter" button (opens menu on lower left side)

6. use the "arrow down" button to select "auto guide"

7. use the ">" button to select "off"

8. use the "arrow down" button to select "done"

9. press and release the "enter"

10. press and release the "TV Guide" button to turn the display off



System Reset Using Service Mode:



1. Enter Service Mode

2. Use the "muting" button to select "initialize" screen

3. While on the "initialize" screen

4. Use the "down arrow" button to select "final setup"

5. Press and release the "enter" button to select "data reset"

6. Use the ">" button on the remote to select "yes"

7. Press and hold the "enter" button until the screen goes black release "enter" button on remote.

8. Power the unit off using the remote control

9. Unplug the power cord from the media receiver to complete the reset

10. Plug in the media receiver; turn the system on and reset is complete.


ok

Pioneer... • Answered on Oct 21, 2017

Not finding what you are looking for?
Televison & Video Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Raj Patel

Level 3 Expert

1042 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Televison & Video

  • Pioneer Televison & Video

Most Popular Question

x volt regulator

  • Televison & Video
Loading...