20 Most Recent Pioneer PRO-99 TV - Page 2 Questions & Answers

You might have a bad green convergence output IC either loose from the circuit board or open internally OR shorted. Stargazer

Pioneer PRO-99... • Answered on Apr 23, 2007

John, im sorry to have to tell you, you have the normal convergence break down, and any adjustment is not going to fix the problem. The Convergence ICs are bad in this set, and both should be replaced at once, as you do not want to pay another repair price 6 months down the road. In these sets there are no user replaceable parts, unless you know how to work on solid state printed circuit boards and understand about the TV safety factors involved. Good Luck Please do not forget to rate this thread.

Pioneer PRO-99... • Answered on Dec 10, 2006

If you're NOT still under warranty you should at least open the TV and look for a blown fuse near where the power cable enters the set. A lot of times you can buy replacement fuses at a local electronic or hardware store and they're easy to replace. Check the fuse. If it is blown, it will be obvious and make sure that the set is unplugged before replacing it. If it blows again, or if it is not blown, your problem is probably in the 'X' volt regulator and you will need professional help with the repairs. You can also check the board where the components are mounted and resoled any that look bad. Brief power outages may cause the TV to turn off on its own. If you are using a surge protector, try connecting the set directly to the wall outlet. In your case it could caused by a blown fuse, a leaky diodes or a bad solder joint at the horizontal drive transformer. All can be replaced at a local electronic or hardware store and they're easy to replace If this does not correct the problem, you may need to have your TV serviced. good luck!

Pioneer PRO-99... • Answered on Jan 19, 2006

Good point :>) Connecting it to a computer, may show it as a volume, but that would be all. As I said, you have an issue that no one else has ever put into Google. That means it is very, very rare. Contact Pioneer direct. It will probably have to go to a Service Centre and be connected to dealer software. No updates https://www.pioneerelectronics.com/PUSA/Support/Downloads

Pioneer... • Answered 3 days ago

If it is 'PRICT', you are the only one to have that error in the universe! Details on resetting are in the manual. Download it, CTRL+F, type 'reset', press enter. https://www.manualslib.com/manual/130334/Pioneer-Htz170dvd.html#product-XV-DV170

Pioneer... • Answered 3 days ago

Google make model remote replacement No 'control universal!

Pioneer... • Answered on Apr 13, 2021

Make sure that the blue-ray player (HDMI Out) is connected to your TV (HDMI In) with an HDMI cable. Set the TV to the input for the player. When not viewing any content, press the Home (Menu) button. Choose the Setup icon on the screen, using the left/right buttons on the remote. Press Enter. Use the Up/Down arrows to highlight Others and press the right arrow button. Use the Up/Down arrows to highlight ARC and press Enter. Use the Up/Down arrows to highlight Yes and press Enter to confirm and save the setting. See page 38 of the manual for the XV-BD717W for the information about the Others sub-menu (including ARC). Make sure that ARC is available on the TV and is enabled if needed. The manual is available here: http://docs.pioneer.eu/Manuals/BCS_313_AFN75473217_LG_manual/ . I hope this helps. Cindy Wells

Pioneer... • Answered on Mar 12, 2021

Sounds like power supply issue. If you are UK based I have a complete set of Plasma Panels that are unused from my time as a Pioneer Service Department, now retired. [email protected] dot co dot uk

Pioneer... • Answered on Jan 06, 2021

1. Open fuse 2. Power supply failure

Pioneer... • Answered on Dec 22, 2020

I have a Pioneer PDP-LX5090, Kuro Flatscreen TV, connected via HDMI4 on a Pioneer AV-receiver VSX-LX60. By connection a Chrome cast on one of the HDMI ports of the AV-receiver I got the same CEC100 error with the same message "device cannot be operated. please check the connection". By disconnection the Chromecast from the USB current feed, the problem dissapeared. Hope this can help you.

Pioneer... • Answered on Sep 09, 2020

This is a common issue and it indicates the laser pickup is near end of life, replacement only option, not cost effective to repair.

Pioneer... • Answered on Mar 18, 2020

If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD & Plasma screen are given with illustrations. You can get an idea about the fault to an extent.

Pioneer... • Answered on Mar 08, 2020

As long as you have a HDMI port you should be able to use it. If you have only one, you won't be able to have any other player plugged in. The firestick doesn't care if the port it is plugged into is labeled 1 or 2 or 3

Pioneer... • Answered on Nov 09, 2019

Not finding what you are looking for?
Televison & Video Logo

26 questions posted

Ask a Question

Usually answered in minutes!

Top Pioneer Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers


Level 3 Expert

513 Answers

Raj Patel

Level 3 Expert

1042 Answers

Are you a Pioneer Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pioneer Televison & Video

  • Pioneer Televison & Video

Most Popular Question

x volt regulator

  • Televison & Video