20 Most Recent Pioneer DVR-810H DVD Recorder Questions & Answers

has the cable company activated your access at the new address,have they confirmed the cable is now active? Len

Search for a Tivo Series 2 IR cable on eBay. Any series 2 cable will work with the Pioneer.

Well there is free help, but you elected for paid help. It is quite clear. Free help questions get answered very slowly, many times not at all. If you want to continue with paid help let me know Tim

portablemedia.manualsonline.com/manuals/.../pioneer/pioneer_dvr_dvr810hs.html

or

http://www.pioneerelectronics.com/PUSA/Support/HomeEntertainment/Blu-rayDisc+DVD/PioneerDVDPlayers+Recorders/ci.DVR-810H-S.Support

COPY AND PASTE EITHER ONE OF THE ABOVE LINKS IN YOUR ADDRESS BAR TO BRING YOU TO YOUR USER MANUAL DOWNLOAD.

COPY AND PASTE BELOW LINK IN YOUR ADDRESS BAR TO PURCHASE REMOTE.

Pioneer.PartStore.com

Remotes.com

ebay.com

pioneer.newremotecontrol.com/PioneerDVD.php

Here is a link to the installation guide for your Pioneer model - refer to every bit of information on p. 29 (which will refer you to some pertinent info in Ch.1): http://www.pioneerelectronics.com/pio/pe/images/portal/cit_11221/98391312Installation%20Guide%20DVR-810HS.pdf

If it will not permit you to do the recording:
You have to use a backdoor method. Inspect your TV and see if it has a yellow jack labelled video OUT or monitor OUT - many TV's do not have them. If you are one of the lucky ones that has a video OUT:
1) Connect a VCR to one of the televisions inputs.
2) Connect a red, white and yellow cable from the video and audio OUTs of your TV to either INPUT 1 or 2 on your DVD recorder
3) Make sure that your DVD recorder is set to either INPUT 1 or INPUT 2 - reading the manual for that model is driving me up the wall - I would change the channel on the DVD Recorder (not the TV) to 2 and use the channel down button until it says Input 1 or Input 2 - whichever the appropriate choice is
4) Play the VHS tape and make sure that you can see the picture on your television screen.
5) Press Record on the DVD recorder

Good luck- I would go insane trying to use that Pioneer - it is user-friendly, but not techie-friendly.

-Tha Mp3 Doctor

Thinking the problem might be the cable box..I bypassed the Tivo and hooked the cable box direct...there was audio on ch. 3 ....reconnected the Tivo and the audio was fine...strange?

Thank you.

Ken Havel
Greenville,WI

I believe that you are already on the right path, your tivo will still be assuming that you are running off the cable box plus you watch dancing with the stars for five minutes one time just to see Warren Sapp attempt to dance and now all of a sudden it wants to record every single piece of televison with dance in the title or discription, but I'm not bitter.

Just re-accomplish the set up and let it know that you are no longer running a cable box. Also tell it that ditching you friday night to hang with it's old high school buddies was so not cool.

there may be two screws on the top of the tray that holds the rounded magnet, the one that is placed to hold the disc when spinning, remove it, you can then simply take the disc out.

Question edited for clarity. Great question Madeleine. The ones with Screen Saver and Audio are in Preview Mode. If you want to watch them, you have to subscribe. It is a tactic to get you hooked and get you to pay. Sometimes they will give you a couple of minutes of video and audio at the beginning of a programme. It isn't a television issue, it is your cable provider and a sales technique. ..

Remove the case, look for a fan, vacuum the main board and all case vents. ..

Sorry you're having problems. Offhand the 8 blink code on a Pioneer Plasma translates to an internal communication failure in the TV and generally requires repairs. However it's worth it to try a hard reset, as sometimes the processor in the TV can simply have locked up. The first thing you would try, is disconnect the set from power, then press and hold the power button on the TV itself (not the remote), for 10 seconds and release. Then plug the set back in, and also check that the power cord is connected tight at the TV as well. Press power once, and see if the set powers up normally.

The blue blinking light on your Pioneer amp could indicate a number of issues. One possible reason is that the amp is in "standby" mode, which means that it is not currently receiving any audio signals. Another possibility is that the amp is experiencing an error or malfunction. To get a better understanding of the issue, I would recommend checking the user manual for your Pioneer amp. If you don't have the manual, you can try searching for it online using the model number of your amp. You can also try resetting the amp by unplugging it from the power source for a few minutes and then plugging it back in. If the problem persists, it may be time to take your amp to a professional for repair.

You need to run a DVD or CD cleaner disc. It has small bristles that clean the dust off the tracking laser. It is less powerful than the reading laser, and is the one that registers there is a disc there. https://www.google.com/search?q=dvd+cleaner+disc ..

Looks like it may be too old? Lots of help below, but this seems hopeful. https://community.roku.com/t5/Roku-setup/Roku-Ultra-with-an-older-HD-plasma-TV-with-1080i-resolution/td-p/561009 Does a Roku Stick Work on Any TV? The Roku Streaming Stick 4K is designed to be compatible with any TV that has an HDMI port. This means it will work on both smart and non-smart TVs, as long as they have an HDMI connection. If your TV is analog, don't worry! You can still use the Roku Streaming Stick 4K by using an AV Composite Converter. This will allow you to enjoy all the features of the Roku Streaming Stick on your TV. All Roku streaming players will work for any television with an HDMI connection, so any Roku player can be connected to a 4K UHD or HDR-compatible television. However, to stream movies and TV shows in 4K UHD or HDR you will need a compatible Roku streaming player and television that supports 4K UHD or HDR. Jul 24, 2023

Do I need a special TV? - Roku Support

Roku https://support.roku.com > en-ca > article

Does Roku Work on Any TV? Here's What You Need to Know

The Home Theater DIY https://thehometheaterdiy.com > does-roku-work-on-a... 2 days ago - Yes, Roku does work on basically any TV as long as it has an HDMI port. Older, lower resolution TV's probably don't need the most updated 4k ...

How to set up your Roku streaming player or ...

Roku https://support.roku.com > Roku setup Jul 24, 2023 - From a USB port on your TV Any Roku Streaming Stick supports USB power, but only some Roku players do. If you are connecting your Roku device ... ‎Roku TV · ‎Roku Streaming Stick 4K · ‎4K TV · ‎Roku Streaming Stick 4K+

Compatibility Unleashed: Does Roku Work on Any TV?

Automate Your Life https://automatelife.net > does-roku-work-on-any-tv 1 day ago - The Roku Streaming Stick 4K is designed to be compatible with any TV that has an HDMI port. This means it will work on both smart and non-smart ... ‎Does a Roku Stick Work on... · ‎Steps to Install Roku on an Old...

If your Pioneer VSX-1020 receiver is not turning on along with your television, here are a few troubleshooting steps you can try:

1. Check the power connections: Ensure that the receiver is properly plugged into a power outlet and that the power cable is securely connected to the back of the unit. Also, check if the power outlet is functioning properly by plugging in another device.
2. Reset the receiver: Perform a soft reset by turning off the receiver, unplugging it from the power source, and waiting for about 15 minutes. Then, plug it back in and turn it on. This can help reset any temporary glitches or issues with the receiver's electronics.
3. Check the remote control settings: Verify that the remote control is properly set up to control both the television and the receiver. Make sure you have followed the instructions in the receiver's manual for programming the remote control to work with your specific television brand.
4. Test with a different HDMI cable: If you are using an HDMI connection between the receiver and the television, try using a different HDMI cable to rule out any potential cable issues. Sometimes, a faulty cable can prevent the devices from properly communicating.
5. Update the firmware: Visit the Pioneer website and check if there are any firmware updates available for your receiver model. Updating the firmware can sometimes resolve compatibility issues and improve overall performance.
6. Contact customer support: If the issue persists, it may be best to contact Pioneer's customer support for further assistance. They can provide specific troubleshooting steps or advise on whether the receiver may require servicing or repair.

Remember to consult the receiver's manual for additional troubleshooting steps and to ensure you are following the correct procedures for your specific model.

Cindy Wells is a trusted Expert here.

Cindy Wells

• Pioneer Master
• 6,628 Answers

FL OFF could indicate a problem with the power supply or the cooling fan inside the receiver. Try unplugging the unit to reset the error code. If the error persists, the receiver needs to be serviced. If the Pioneer VSX-90 is still under warranty (1 year), contact the manufacturer. Otherwise, decide if it is worth fixing (including the shipping costs and minimum service fee). I wish that I had better news for you. (There are service manuals available for sale online. I know nothing about these vendors.) Cindy Wells Posted on Nov 28, 2022 https://www.google.com/search?q=Pioneer+VSX-930.+The+%27FL%27+light+flashing+on+and+off You can take it to any audio technician locally ..