Questions & Answers
Ok i have a pioneer
Fault at its main digital board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts.
In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.
9/3/2017 6:33:03 AM •
61 views • 0 helpful votes
The picture gets shakie,then it just turns
the problem on this tv is a lot of loose connection on the power supply board , u need to solder all the componect on the power supply board and sould be ok , or u can hire a tv tech and do this job for u normal repair is about $250
12/1/2010 5:59:51 PM •
33 views • 0 helpful votes
My SD-P6093-K Pioneer has recently
STK ICs 2 of them,example STK392-110.also CK hori out put transistor and little blue capacitor 2Kvolts it feeds back to Hori Transistor. Mats has STKs
1-800-628-1118 $10.95 each they retail for $55.00 each in repair shops.
3/16/2010 6:13:20 AM •
234 views • 1 helpful votes
TV comes on with snow and clears up after 10-15 mins
Their is no more you can do.
You need a professional.
Stop using the TV until it is repaired.
Call the manufacturer to find you nearest authorized service center.
MR. TV Sales & Service Inc
Milwaukee Wisconsin 53405
3/24/2009 7:58:31 PM •
134 views • 0 helpful votes
Pioneer rear projection tv
You might want to check the power supply/deflection board for bad solder connections. i found on the one i was working on. the standby and main power relays was broken loose from the board also check for any other solder joints that look cold jointed. i have been a tv technician for 13 years.
I hope that will fix your problems...
5/7/2008 1:38:47 AM •
363 views • 1 helpful votes
Ok my projection tv when
It would be difficult to fix without an oscilloscope.
I tried to finding a repair manual for your model, but older model manuals are hard to find.
3/17/2008 7:11:01 PM •
164 views • 0 helpful votes
Pioneer pro 150fd Blinking red light
remote batteries fresh.
call for service TV
bad PSU in TV or shorts to it. top causes of dead.
omg AC power strip dead? connect TV to live wall jack first./
7/3/2022 11:21:41 PM •
44 views • 1 helpful votes
Pioneer RX Z15 not turning on
There are a couple fuses on the secondary side of the transformer, have you checked those? If they're good then start trouble shooting the regulators. This isn't a high speed switching supply so repairing it should be quite simple. Here is a free download for a schematic, without that it's going to be harder to repair.
3/5/2022 10:09:54 PM •
62 views • 0 helpful votes
Pioneer plasma won't turn on
There are possibly two issues here.
The PDP screen requires the tuner box to work.
The power supply has a few daughter boards that can fail on the main power supply.
1/5/2022 8:50:34 PM •
107 views • 0 helpful votes
Not finding what you are looking for?