20 Most Recent
- Page 5 Questions & Answers
OCE TDS 600 SHOWING IN CONTROL PANEL connecting to controller
There is either a problem with the controller, or wiring to the controller. Check to make sure the controller is running, check the cables to the printer and controller. If everything seems OK, reboot. If error returns, call an authorized Oce representative.
Conditioning oce tds 300
The developer is probably too old or it could be the developer assy is faulty. A cleaning needs to be done as well. The developer replacement has to be done by an authorized Oce representative. It's not able to be done by the customer or anyone not qualified.
My Oce TDS 400 keeps
Sounds like a problem with an NTC. Call an authorized Oce representative for parts and service.
We have an error 8512
Probably a failed NTC in the fuser section. Call an authorized Oce technician to replace it.
Oce plotwave 300
power switch flashes
I've never seen this error in my life, and it is not in the manual. I recommend you call an authorized Oce technician to come take a look at it. It might be a problem with the controller.
Please describe your OCE Plotwave
Fuser NTC 4 temperature too high. I recommend to call an authorized Oce technician to repair, since the ceramic NTCs are difficult to get into the unit and are easily broken.
Oce 860 error code 22004
Software failure in the CPU i/o PBA. Turn off the machine, and unplug for 10 seconds. Replug and power on. If the error doesn't go away, call Canon and an authorized Oce tech will have to take a look at it. It may be as simple as flashing the CPU board, or it may require replacement. It also could be the power supply.
Not sure what you have tried but if there are no lines when printing but there when scanning there is something on the scanner. Could be something as small a single dot of dirt and it will put a line down the whole page. Try cleaning the glass.
Copier leaves a black line when printing through the top paper feeder. Ok coping from the flatbed
When copying from the feeder the page is fed across a fixed point at the head of the flatbed. Any dirt etc on the glass at this point can present as a dark line running vertically down the printed page. When copying from the flatbed, the scan head is moved down the page so any dirt on the glass will only appear as specs. Try cleaning the glass, especially at the head of the flatbed where the feeder is loading the page to be copied.
Not finding what you are looking for?