20 Most Recent
Questions & Answers
How to install a quicklink pen.......Get error
Please Always remember that first you should install its software and then attach the hardware or when the software required during installation. If you follow my instruction, you will get succeed in installation of any hardware and also in this case.
Oce TDS400 Scanner and Printer not connecting to controller
The recovery CD needs special tools and software to run. It can't be reinstalled by the customer. In addition, the controller needs to be relicensed in order for the software to run properly. Call an authorized Canon/Oce technician for parts and service.
Oce plot wave 300 shows
You should never blow your machine. The error must be cleared by an authorized Canon/Oce service technician. There is no other way.
Oce TCS500 unable to measure media. Help!
The M&C unit needs to be replaced. This is a specialized part and needs specific instructions in order to be replaced properly. Call an authorized Canon/Oce technician for parts and service.
I have an Oce TCS400
Print out system settings and the IP address should be on one of the print outs. Log into printer, using System Administrator - SysAdm and change the IP that way.
Oce TDS 600 Error Code 10501 and 22019
Protocol versions conflict. Call an authorized Canon/Oce technician for service. The scanner will have to be reflashed with new firmware. This can't be done by anybody other than a technician with proprietary software.
Not finding what you are looking for?