20 Most Recent EliteGroup P4VMM2 V7.1 Motherboard - Page 3 Questions & Answers

If there's a problem with the system detecting the HDD, Make sure the system is off, then check the connections, power, data, etc.. Also troubleshoot with a known operating HDD. Hope you fix it.

are you missing NTDLR ? INFOMATION, PLEASE.

Error Code 4

System error code 4 means "The system cannot open the file." This error code may also display as "ERROR_TOO_MANY_OPEN_FILES" or as the value 0x4.

look at the bios number that comes onto screen press pause before it vanishes . Then do a google search on the number to find the motherboard manufacter and visit thier web site . look for support download drivers .

ftp://ftp.wortmann.de/TERRA_Computersysteme/PCs/Mainboards/ASUS/P5LD2-VM_S/bios0405_rev1.zip ftp://ftp.wortmann.de/TERRA_Computersysteme/PCs/Mainboards/ASUS/P5LD2-VM_S/bios0705_rev2_rev3_rev4.zip

I ran into two different problems, but both involved the power supply. On one, the fan bearing were bad, and when the fan would bog down, it would drop the voltages on the motherboard, causing a reboot. The other one, the power supply was full of dust which would become charged on opposite terminals, would reach across and touch, cause a short, and then the power supply would restart. A new fan fixed one, and blowing out all the dust fixed the other. Blowing out all dust never hurts. Hope that helps.

hp web site go to support then type in board then download manual from there ok it is good to update your driver as well.

http://h10025.www1.hp.com/ewfrf/wc/manualCategory?cc=ca&dlc=en&lang=en&lc=en&product=5157078& Is this it?

The splash screen with the LG Flatron logo is the monitor's splash screen not the PCs.
The machine is NOT booting up the splash screen is the monitor coming on.
Remove the 1Gb stick an see if the machine performs normally.
If it does then power it off, remove the power cord and CAREFULLY reinstall the new stick.
If it fails to boot you may have a defective memory module.
If the machine fails to boot with the new stick removed make sure you have the original memory seated properly and all cables securely attached

go to your web site download drivers from them ok

put in new card or web site of board download support ok

Replace the motherboard. Or give us a description of the problem, we may be able to give you some information on how to fix it.

Replace the motherboard.