SonicWALL SSL-VPN NetExtender Adapter - Answered Questions & Fixed issues
I tried to install NetExtender
In Windows your security settings need to be set to accommodating this installation you can find the security settings for IE8 by going to tools then internet options set your security to low from your question it reads that you have done this already my research bring me to this option please read below.
Article Applies To:
SonicWALL SMB SSL-VPN Appliances and Software: SMB SSL-VPN 2000, SMB SSL-VPN 4000, NetExtender
Firmware/Software Version: 2.5 or higher
Problem Definition:
When installing NetExtender on any supported Windows operating system, the error "Failed to install NetExtender, the installation has been rolled back" may be observed, especially when the operating system is installed on a drive other than the default. This issue is resolved by upgrading the SSL VPN 2000 or 4000 appliance to firmware version 2.5 or higher and making another installation attempt.
Resolution or Workaround:
For each of the following possible causes of this behavior, an explanation, workaround, or solution is provided:
- User does not have administrative privileges. With 2.5.x.x firmware and above, administrative privileges are required for initial installation only, previous versions require administrative privileges for each update.
- Browser security settings. Add https://IP-or-DomainName to trusted sites, and set trusted sites security level to LOW.
- Popup blocker. Disable all third party popup blockers.
- Anti-virus or anti-spyware. Temporarily disable all third party anti-virus or anti-spyware solutions.
Source: SSL VPN 2000/4000 2.5 Release Notes this has been copied from doing my research this is not my material but a help post from another source. Thanks for using FixYa! do not forget to vote for me. John
3/12/2011 10:42:43 AM •
SonicWALL...
•
Answered
on Mar 12, 2011
•
8,873 views
Strange noise
Sounds (pun intended) like one of the cooling-fans has worn-out bearings, and is "screeching", just before it totally freezes-up, and dies, and causes your SonicWall to overheat.
7/29/2014 3:53:48 AM •
SonicWALL...
•
Answered
on Jul 29, 2014
•
151 views
UPNP over sonicwall
For "security" reasons, you should not all UPNP traffic from "outside" of your network to enter your "internal" network. Block it.
7/29/2014 2:58:47 AM •
SonicWALL...
•
Answered
on Jul 29, 2014
•
1,558 views
Remove pc performer from my computer
Hi you can remove the PC Perfomer using the software Ccleaner.
CCleaner 4 09 4471
select tools and uninstall the PC Performer, if it doesn't uninstall then select delete entry. Also Ccleaner makes your computer faster by removing temporary files/cleaning registry. Hope this helps.
5/30/2014 6:08:17 AM •
SonicWALL...
•
Answered
on May 30, 2014
•
98 views
Hack the sonic wall
Hacking is a broad term and there are many attack vectors which you can use. If you do not truly understand that then you will not be cracking a firewall. You need a method of attack, recon it and search the vulnerabilities.
4/28/2014 7:07:17 PM •
SonicWALL...
•
Answered
on Apr 28, 2014
•
261 views
Get bsnl internet settings sony xperia
The high-level answer is to get the login parameters and internal IP for the Sonicwall, get the Internet parameters for your new ISP, and then log into the Sonicwall device, go to Networking-> Interfaces, and configure the WAN adapter with those settings.
1/31/2014 2:27:29 PM •
SonicWALL...
•
Answered
on Jan 31, 2014
•
148 views
Not able to ping 64.16.223.163
This is not a valid address or the server that is suppose to be connected to that address no long exists.
1/11/2014 8:09:29 AM •
SonicWALL...
•
Answered
on Jan 11, 2014
•
63 views
Wife is patient in local
The inability of a client running Windows Vista to connect with a
SonicPoint or any SonicWALL firewall (UTM) appliance running SonicOS
Standard firmware is caused by a lack of a correct association on the
SonicWALL between the computer running Windows Vista and its assigned IP
address. Follow these steps to work around the issue by editing the
System Registry:
WARNING: Exercise extreme caution when modifying the System Registry.
Incorrect modifications could lead to an inability to boot your system.
It may become necessary to completely reinstall your operating system.
- Click the Start button.
- Select All Programs > Accessories.
- Right click Command Prompt and click Run as administrator.
- Type regedit.exe and press enter.
- Go to the following location: HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
- Right click this entry and select New Dword.
- Rename the new entry ArpRetryCount (leave it set to 0 by default).
- Restart the computer.
- Reassociate with the SonicWALL. You should notice a successful connection.
Please print this out if possible, you may want to take your computer to a local repair shop to make this change if your not comfortable.
3/23/2011 12:40:54 PM •
SonicWALL...
•
Answered
on Mar 23, 2011
•
225 views
I can't get the laptops
Is "sonicwall fire wall" a separate computer-networking appliance, or is it software that runs on each laptop?
Uninstall it, and enable the Windows Firewall. This latter firewall is just as good as any "commercial" software.
3/17/2011 11:24:21 PM •
SonicWALL...
•
Answered
on Mar 17, 2011
•
207 views
My account has been hacked into and the password
Contact your ISP, explain what the issue is, advise them fully follow up by letter and change all accounts and password open up new account. If any money is involved, then contact all baks and credit card companies.
3/16/2010 1:08:03 PM •
SonicWALL...
•
Answered
on Mar 16, 2010
•
106 views
Router will not see modem
It seems your router is going bad , first thing to do here is to reset the router by pressing the reset button for 30 seconds and after the reset unplug the power of the router for 10 seconds and then if you still have the setup CD for the router just run it to the computer conencted to the router and reconfigure the router back....
10/25/2008 11:15:40 AM •
SonicWALL...
•
Answered
on Oct 25, 2008
•
190 views
Como cancelar el winter driver
EnglishIt is a car, and cars are complexbut no car was told , maker, model , and year.we can not guess cars. post the VIN? and all that is knownname a problem what can't your car do right?name symptoms or evidence that is confusing to you.then answers can happen.onlygood luck , finding itand Mucho Gusto.my guess now is this is posted to computer forumand not to CARS !must be some odd traction controls thing'but 10,000 models of cars,
4/21/2024 5:41:42 AM •
Computers &...
•
Answered
3 days ago
•
22 views
Not finding what you are looking for?