Top 20
Radio Shack Extra Low Temperature Outdoor Weather Sensor - Page 2 Questions & Answers
How to set electrode on pilot for empire rh50b
- Turn off the gas supply to the heater.
- Locate the pilot assembly on the heater. It is usually located near the bottom of the unit.
- Remove the pilot shield, which is typically a metal or plastic cover that protects the pilot assembly.
- Locate the electrode, which is a small metal rod that is located near the pilot burner.
- Adjust the position of the electrode so that it is directly in front of the pilot burner, with a distance of 1/8 inch to 3/16 inch between the electrode tip and the pilot flame.
- Replace the pilot shield and turn the gas supply back on.
- Test the pilot flame to ensure that it is stable and blue in color.
34788 Recover does not work
"Recover" is a term that can be used in various contexts, can you please provide more information on what you are trying to recover and what is the specific issue you are facing? If it is a software issue, please specify the software and the operating system you are using.
Also, please provide more information on what you mean by "does not work", is there an error message or any other symptom that you are experiencing?
This information will help me understand the issue better and provide a more accurate solution.
How can i get the weather station to communicate with the display center
If it is like mine, the CR2032 battery in the base station only lasts about 6 months, whereas the one in the outdoor unit lasts over a year. Try this though. Remove the batteries from both units. Replace the battery in the indoor unit and then in the outdoor unit. It should re-register it.
Not finding what you are looking for?