20 Most Recent Radio Shack Extra Low Temperature Outdoor Weather Sensor - Page 6 Questions & Answers

Two LR44

Re: Eddie Bauer Wireless Thermo Clock - Model 0465 TIME ZONE SETTING The default time zone is PACIFIC (P). lf your location is not in the Pacific zone, set the time zone as follows: 1. In normal time mode, press the "[,4ODE" key to enter the alarm time mode. 2. ln alarm time mode, press and hold the ADJ . 'Cl"F" key for 2 seconds to enter the time zone setting mode. 3. Press ihe "ADJ "C/'F" key to select the proper time zone: P=Pacific M=Mountain C=Central E=Eastern. 4. Press the f,'lODE key to save and exit the time zone setting mode, or let it exit automatically 30 seconds later without pressing any key. This sequence fixes my thermo clock. Follow step-by-step ...... Sent via Mobile GMail Services 06.20.2021 KJ Bleus Parsons ---------------------------------------

Unlikely, unless you fancy trying to check the connections behind it? It doesn't appear to be a known issue. https://www.google.com/search?q=Robinair+34700z+display+went+blank ..

It is available here http://www.vintagemanuals.com/manual/radio+shack/63-712 https://www.google.com/search?q=manual+for+Micronta+or+Smart+Model+63-712+LCD+World+Time*Calendar*Weather ..

ask fluke i never had any errors on mine

It's telling you that it is a Fluke 177...ie the (F177). Absolutely normal.

I've got one of these. No idea how to change the date

keep the two units together for a while

Contact Seiki directly to request the manual.

First of all, this is a problem the guys from Home Depot wouldn't know how to fix.

Years ago, maybe when this post was originally written you may have needed to do a two coat system.

Your best and actually easiest option will be to power wash your stucco, to remove any dirt from the surface.
Then you will need to mask everything up tight because you're about to spray all the stucco. Cover any concrete and plants nearby, (anything that is closer than 10 feet from the stucco.)

Then go to Sherwin-Williams and purchase Loxon XP this is a one coat system however if you have larger cracks in the stucco you will either want to caulk them with an elastomeric caulk (if you don't have too many) or apply a second coat of Loxon XP. If you're a do it yourself kinda of person you can go to home depot and rent a spray machine. While your spraying your gonna want to back roll it. www.outbackpaintingusa.com

https://www.google.com/search?q=manual+for+KAL+3001+multimeter ..

Hi Pete. I don't keep receipts either : ^ )
No that I am done commeserating, try this. Remove the batteries. Use the eraser end of a common pencil to scrub and clean the battery contacts inside the battery compartment. Also pull the contacts a little closer to the surface if you can. Then reinstall the batteries and you may be up and running.
Please rate my answer as verey helpful thanks. Joe

I would search for a workshop manual for your make and model.

Here it is:
http://www.tequipment.net/pdf/Wavetek/5XL10XL15XL16XL_Manual_Rev_A.pdf

Page 6 of the manual refers

DIGITECH XC-0366 USER MANUAL Pdf Download ...

www.manualslib.com > ... > Weather Station

Temperature Alert Setting: You can program your weather station to sound an alert whenever the outdoor temperature exceeds the upper or lower pre-set limit.

Replace the battery in the unit. https://www.manualslib.com/manual/1112231/Auriol-Z31915.html?page=129 ..

I had the exact same problem and after messing around with it for about half an hour I realized that the cord was the problem, I was kind of moving it around while plugged in and if I hold the end of the cord in a certain direction it works like it should. If the results are the same for you, I suggest either getting a replacement cord or just do the not so reliable option and tape the cord into place.

ask your phone company

What is 'rapair'?

It is a known issue Try first a general reset: - remove the batteries from the clock (thus turning it Off.) - remove the batteries from the outside sensor (if you are not aware that it has batteries, then perhaps it is not working because the batteries are no good any more! check that also.) - wait 10 minutes with no power to the device. - put batteries back in, power On again. - hit Reset. - hit Receive button. - change the channel for reception from the outside sensor. - change the channel on the outside sensor to match that channel. - then set the time once more, once the remote temperature is sensed once again. If this does not get the outside temperature reading working again, you may have to replace that temperature sensor. https://www.google.com/search?q=Model+spc373 ..