20 Most Recent Bogen Communication GS35 Amplifier Questions & Answers

Use an Ipod to double phono ( RCA cable) plug into AUX1 and 2 on the back of the amp. Use vol controls for Aux 1-2

fan should allways come on.the light just tells you the line is plugged in.double check your speaker/input, and all common sense checks.if not, take it to the shop.preamp or output transistor problem.

Essentially, you DON'T !!!

If you need to connect four mics, they should attach to the four XLR type connectors.

The terminal strip above is only for TWO mics.(#5 and #6)

For those you connect the SHIELD to the middle terminal of each under the "MIC5/6" labeled "GND". The each of the BALANCED microphone lines for the two extra mics go to the left and right terminal beside the respective GND terminal.

it sounds like you have a power supply problem
try and check for a blown diode inside close or
around the transformer.
maybe this will help.

you can use the head phone jack to connect the ipod to anything. you will need an 8th inch audio cable and you're good to go..

whats a paging speaker? what amp are you using?

Hi
You can down load a copy by clicking the link at the bottom of this page
regards robotek

1. Power Off: Turn off the device.
2. Jumper Configuration: Locate the jumper labeled "S16" on the device. Initially, it should be connected to pins 2 and 3.
3. Power On (Alarm+All LEDs Flashing): Turn the device back on. You'll see the alarm LED and all other LEDs flashing.
4. Power Off Again: Turn off the device once more.
5. Jumper Adjustment: Change the jumper configuration from pins 2 and 3 to pins 1 and 2.
6. Finished: Your Porpo YH-2000 is now set to the desired angular unit mode.

If you encounter any issues, you can press the reset switch on the back of the device to reinitialize it.

this model SA rather than SC seems to be a Middle East model. The SC version doesn't have DAB. https://www.google.com/search?q=panasonic+sa-pm250+instruction+manual ..

All questions need clear 'make model (what it is)' first 3 words. https://www.google.com/search?q=fmdott085+V398 ..

Question edited for clarity, typo and CAPS. Question moved from Cars and Trucks category. Claim on the warranty irrespective of how long you have had them. They charge $180 but they cost them $20 to buy from China. Package them up and send them tracked and ask them to replace the batteries. How long is the warranty on AfterShokz? While we hope you never need it, all new Shokz purchased from authorized retailers come with a two-year warranty that begins on your date of purchase. Jan 11, 2019

How To File A Warranty Claim For Your SHOKZ Headphones

https://www.google.com/search?q=Openfit+Shokz+battery+replacement ..

Are you using the charging cables that came with it? That is a type C. Are you securely attaching the charging cable? A loose connection would keep the battery from charging. If you had a low battery, you would see a red light. That you have no light at all suggests there is no charge left in the battery. I'm not sure the reset will work with no charge which is why you ought to check the cables first. But turn it off and then hold down the Multifunction button for 10 seconds to reset it. Then turn it back on and see what happens. If you can, test the charging cable on aother device. If you have another type C charging cable, try it, just to eliminate a bad cable. If these suggestions don't work, you may try the manufacturer's customer support.

The F2100 remote is not explicitly listed as compatible with the AerialBox T2100, I recommend using the remote that came with your AerialBox T2100 for optimal functionality. If you have any specific compatibility concerns, I suggest reaching out to Dish TV customer support for further assistance.

I have the same model with the 8 track player, original manual, and original receipt dated 1975.

Probably nowhere as this is an Amazon / eBay special so made in China. You should be able to go to Windows Settings, - Hardware and tell Winderz to find a compatible driver. https://www.google.com/search?q=VIBE+SOUND+USB+Turntable+Model+VS-2001-USBT+drivers ..