Eaton Powerware 9130 UPS Battery - Answered Questions & Fixed issues


look at the fuse for the inlet power. It may be bad. There is a transfer relay inside that may not be switching correctly.

Eaton Powerware... | Answered on Nov 19, 2014 | 787 views


need to change batteries.
cannot hold charge

Eaton Powerware... | Answered on Nov 05, 2014 | 1,492 views


Hi guys, this series of UPS is modular type, that particular problem code were board problem you cannot fix that on your own.

Eaton Powerware... | Answered on Sep 16, 2011 | 1,091 views


the manual covers this, it tells you to read alarm event code
messages they are not in number format but text.
in clear english the alarms.
RTM or call EATON, we are Fixya not EATON,ok>
most error common means bad batteries. 99% are.

http://www.eaton.com/content/dam/eaton/products/backup-power-ups-surge-it-power-distribution/backup-power-ups/eaton-9130-ups/eaton-9130-ups-pdm-user-guide-manual-164201798.pdf

Eaton Computers... | Answered on Dec 08, 2019 | 246 views


see the instruction booklet for that - - - or contact eaton directly.

Eaton Computers... | Answered on Dec 08, 2019 | 489 views


UPS used lead acid batteries which die after 3 or 4 years. Disconnect the power and open it to see which ones it uses. You will know they are dead if they have swollen or melted. Buy replacement batteries.

Eaton Computers... | Answered on Dec 08, 2019 | 44 views


learn that when you have black out.
the batteries TAKE OVER< and are huge stress on any battery like this,, and when the lights (AC power) turned the UPS tries to charge said batteries and are now bad.
time for new batteries, or let it beep for 24hours and hope the batteries can recover.
the manual tells you how to see if the batteries are bad and with errorcodes, on all UPS made. RTM read the manual first.
no 2 UPS are the same , unless are.
the first is battery voltage under charge, if too low that means
a cell in 1 battery is shorted. as the LOVE TO DO.

Eaton Computers... | Answered on Dec 08, 2019 | 33 views


no UPS stated, model.
how old are you batterie(s)
charging errors of most kinds means the battery is bad.
they can do that even year old, but mine last about 3 years on avg.
no battery in any USB with Gel Cells, last a long time.
a fraction of all else inside the box. in fact.
buy a new battery and put it in.

Eaton Computers... | Answered on Dec 08, 2019 | 60 views


Hello Eugene

This is the only post that you have posted here on Fixya dot com, albeit you have posted this same thing twice. Therefore I suspect you asked the question elsewhere and then came here to complain about it!

I suggest you contact Eaton direct by phone.

https://www.fixya.com/users/eugene-loach

Andrew - Fixya Moderator

Eaton Computers... | Answered on Dec 08, 2019 | 24 views


contact eaton

Eaton Computers... | Answered on Jul 05, 2018 | 375 views


alarm 707 pulsar

Eaton Computers... | Answered on Jun 22, 2018 | 604 views


We do not have these passwords

Eaton Computers... | Answered on Jul 13, 2017 | 1,378 views


check and flip the reset button
if it still is faulty have it repaired or replaced

Eaton Computers... | Answered on Nov 03, 2015 | 637 views


Hello, If you powered down and still not working then the only alternative is to replace.

Eaton Computers... | Answered on Oct 02, 2015 | 653 views

Not finding what you are looking for?
Eaton Powerware 9130 UPS Battery Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Eaton Computers & Internet Experts

Gruber Power...
Gruber Power...

Level 2 Expert

176 Answers

jimixclay

Level 2 Expert

66 Answers

Tom Chichester

Level 3 Expert

55584 Answers

Are you an Eaton Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...