Top 20 La Crosse LaCrosse Technology Professional Weather Station - Page 4 Questions & Answers


Battery compartment contains reset button. Press. Will need to re-enter time and date.

https://www.acurite.com/kbase/weather-stations/02031RM_Weather_Station.html

Measuring Tools... | 98 views | 1 helpful votes


Radio Frequency communication may come and go occasionally. This can be normal in some environments (e.g. moister climates). If transmitter signal is lost, please wait 2-4 hours for the signal to reconnect on its own.

Here is a link to the User Manual for your product.
https://www.lacrossetechnology.com/media/catalog/product/w/s/ws-8119u-it__faqs_1.pdf

Measuring Tools... | 124 views | 0 helpful votes


try new test leads first. even if the unit is miscalibrated, you should get the same measurements from the same components/circuits. you'll need to send the unit to a calibration center, or the manufacturer, to get it zeroed out, if you still need to afrer getting new test leads

Measuring Tools... | 113 views | 0 helpful votes


Place your remote temperature sensor and the inside unit together for about an hour to see if they both read the same or if there is a large difference in the temperatures.

Dashes on the outside temperature reading may indicate that the inside unit is not receiving a signal from the remote. Change the batteries on the remote or change the location of the inside and/or outside units so that they can receive a strong signal between each other.

Your smartphone temperature may be coming from a location that is not near your home. They are often from a weather service. Where is your local temperature sensor located? Is it in the sun? Is it on the south side of the house, or another location where the sun or an air conditioner or other heat source may affect the accuracy of the reading? Try to locate your outside sensor in a shaded location with plenty of ventilation, and away from heat sources.

Measuring Tools... | 113 views | 0 helpful votes


maybe needs batteries. after replacement let them sit close together for a while

Measuring Tools... | 421 views | 0 helpful votes


Hello Anthony, I sent you a link so you can find out the manual of the tester Sperry DM-210a and another where you get an explanation of the operation
I hope you can solve your concern
Greetings Franco Dosil

Hola Anthony, te envio un link para que puedas descrgar el manual del tester Sperry DM-210a y otro donde te dan una explicacion del funcionamiento
Espero que puedas resolver tu inquietud
Saludos Franco Dosil

https://www.hunker.com/13414165/how-to-use-a-sperry-dm-210a-meter

https://greenlee-cdn.ebizcdn.com/media/52058078REV01.pdf

https://www.hunker.com/13407450/instructions-for-a-sperry-dm-210a

Measuring Tools... | 392 views | 0 helpful votes


Have you tested the rain gauge using the calibration procedures on page 21 of the manual? Specifically confirming that the bucket is emptying about every 25 drops.

https://www.acurite.com/media/manuals/01536-instructions.pdf

Measuring Tools... | 125 views | 0 helpful votes


no info -generic answer check with manufacturer -owners manual online search uging make and model of mystery unit

Measuring Tools... | 121 views | 0 helpful votes


1. Disconnect the test leads from any energized circuit and then from the instrument.
2. Turn the range switch to the "OFF" position
3. Slide off the back case battery cover.
4. Remove the battery from the compartment and unsnap the battery connector.
5. Replace the battery with a 9V transistor type battery (NEDA # 1604), For maximum battery life, alkaline cells are recommended.
6. Reverse the above procedure to complete replacement.

Measuring Tools... | 118 views | 0 helpful votes


Remove the outside batteries, wait a minute or so and insert the batteries. It should pair.

Measuring Tools... | 114 views | 0 helpful votes


I do not believe that you can buy these separately. They are factory programmed and paired together.

Measuring Tools... | 559 views | 0 helpful votes


It is not unusual for a sensor placed directly in the sun to produce a reading that is higher than "normal".

Measuring Tools... | 124 views | 0 helpful votes


Depends on the make of the scales. Check manufacturer.

Measuring Tools... | 115 views | 0 helpful votes


can the battery be replaced. If so, how?
open the cover on the back of the device. this is done by squeezing the cover of the battery sector slightly. then remove the old batteries and replace the new ones (I assume you have the AAA) and put the new ones in keeping with the polarity for the device to work properly and then close the battery compartment cover in reverse order

Measuring Tools... | 125 views | 0 helpful votes

Not finding what you are looking for?
La Crosse LaCrosse Technology Professional Weather Station Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top La Crosse Measuring Tools & Sensors Experts

Cindy Wells

Level 3 Expert

6099 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Ngoro

Level 3 Expert

2606 Answers

Are you a La Crosse Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

La Crosse Measuring Tools & Sensors

  • La Crosse Measuring Tools & Sensors

Most Popular Question

lacrosse wss 1912 1t weather station

  • Measuring Tools & Sensors
Loading...