20 Most Recent La Crosse LaCrosse Technology Professional Weather Station - Page 2 Questions & Answers


La Crosse... | Answered on Oct 25, 2017

  • Remove all batteries
  • Install known-good batteries in transmitter. Wait for it to initialize and begin sending data
  • Install batteries in "main station". You should see temperature displayed. If not, the transmitter may be ng

La Crosse... | Answered on Sep 24, 2017

Most LaCrosse weather station manuals are available here: http://www.meade.com/support/manuals/ or on the product page (see the Support tab). Using the search feature on the support page, I found three models which start 308-1414. Two of these differ in the color of the case of the weather station. Hover over the picture of any of these weather stations and click on the More button to go to their product page. The direct link to the manual for the 308-1414MB is http://www.lacrossetechnology.com/media/catalog/product/3/0/308-1414m.pdf . This product page is http://www.lacrossetechnology.com/308-1414mb-weather-station/ . The manual for the 308-1414W/308-1414B is http://www.lacrossetechnology.com/media/catalog/product/3/0/308-1414.pdf . The product page for the 308-1414W is http://www.lacrossetechnology.com/308-1414w-weather-station/ .

I hope this helps.

Cindy Wells

La Crosse... | Answered on Jul 10, 2017

There should be controls on the rear for the purpose.

La Crosse... | Answered on Jul 03, 2017

Probably due for battery replacement.

La Crosse... | Answered on Jul 02, 2017

The batteries in the outdoor unit may have failed.

La Crosse... | Answered on May 25, 2017

There may be defective batteries or a poor battery connection at the transmitting end.

La Crosse... | Answered on Feb 13, 2017

The instructions for your station call for a specific set up procedure. Batteries should be installed in the transmitter first with time allowed for it to initialize and begin sending data. After installing batteries in the receiver, you should see wind speed and temperature displayed. BUT, here in the real world I have a Lacrosse receiver currently displaying a balmy 67 degrees inside and a not-so-balmy - - outside. I believe the alkaline batteries used in the transmitter lose efficiency or freeze at low temperatures. Warmer weather restores the outside temperature display.

La Crosse... | Answered on Jan 05, 2017

The manual for the thermometer is available on the LaCrosse site: http://www.lacrossetechnology.com/7034twcit/index.php . The direct link is http://www.lacrossetechnology.com/7034twcit/manual.pdf .

Put the batteries in the remote(s) first. (If you need to reset the units, pull the batteries from the indoor temperature sensor and the remotes for 10 minutes before restarting.) With the remotes and indoor sensor 3 to 5 feet apart, put the batteries in the indoor temperature sensor. Then wait 10 minutes before pressing any buttons. Once you have confirmed communication between the units, then move the remotes to their final location (not more than 330 feet away minus 30 feet for external walls or windows and 20 feet for each internal wall between the units.)

I hope this helps.

Cindy Wells

La Crosse... | Answered on Sep 15, 2016

has to have a small sliding door on the back . look harder .

La Crosse... | Answered on Sep 24, 2015

Not finding what you are looking for?
La Crosse LaCrosse Technology Professional Weather Station Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top La Crosse Measuring Tools & Sensors Experts

Cindy Wells

Level 3 Expert

6101 Answers


Level 3 Expert

85239 Answers


Level 3 Expert

2608 Answers

Are you a La Crosse Measuring Tool and Sensor Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

La Crosse Measuring Tools & Sensors

  • La Crosse Measuring Tools & Sensors

Most Popular Question

lacrosse wss 1912 1t weather station

  • Measuring Tools & Sensors