20 Most Recent Konica Minolta DiMAGE X Digital Camera Questions & Answers

i have that problem on my camera so what can i do to fix this problem.
Thank you

try a new battery it maybe that your battery has gone wrong if under guarantee take it back

You can get these online. amazon has them and their under 5 dollars..

Disassembling your camera voids the warranty. It may or may not be simple task, depending on your experience working with electronics.

If you can afford another camera and are willing to take the risk of taking it apart, it may be worth the experience.

Don't do recovery. Uninstall the camera software and then we'll go from there.

I can't help with the techy side I am afraid but we have the same camera and also have a vista laptop. We have not had a problem but I don't think we have ever tried plugging the camera into the laptop as I just put the sd card straight into the laptops card reader and save straight from it. Easy peasy.
Glad I spotted this though. Good luck

If the lithium batteries are of the AA shape then put them in a small torch and leave the torch on to fully run them down. If they are of an odd shape endeavor to do this with bulb wire and tape. Then try recharging them. If this fails- simply get a new set of batteries at first. Then come back

When I can not see LCD screen when sun shines on it I use viewfinder , I think it tells you in the user Instruction manual if sun is so bright you can not see LCD use viewfinder .

The best way to remove all pictures from the memory card is to format it. This wipes all data from the card and prepares it for further use.Without knowing the model of your K-M camera I can't give you the exact procedure for formatting the card, but there should be a command somewhere in the menu system, probably under "Setup".

http://download.cnet.com/Minolta-DiMAGE-E201-USB-Mass-Storage-Device/3000-18493_4-80765.html

Page 117 says it has to be done at a Minolta Service Centre. https://upload.cyfrowe.pl/cyfrowe/instrukcje/aparaty/minolta/minolta_z2_eng.pdf https://www.google.com/search?q=konica+minolta+dimage+z2+replace+memory+battery ..

The backup cell is rechargeable and when the main battery is reinserted and charged, it will charge the backup cell after a while.

If your Konica Minolta Dimage Z6 camera is working fine but is not being recognized by Windows 11, there are a few things you can try to troubleshoot the issue:

1. Check the USB cable: Make sure that the USB cable you are using is properly connected to both the camera and the computer. Try using a different USB cable to see if that resolves the issue.
2. Check the USB port: Try connecting the camera to a different USB port on your computer to see if the port is the issue. Some USB ports may not have enough power to detect the camera.
3. Install the camera driver: If the camera did not come with a driver disc, try downloading and installing the driver from the manufacturer's website. Make sure to download the correct driver for your camera model and operating system.
4. Restart the computer: Sometimes, restarting the computer can help to resolve issues with USB devices not being recognized.
5. Try a different computer: If the above steps do not work, try connecting the camera to a different computer to see if the issue is with the camera or the computer.

If none of these steps resolve the issue, it is possible that there may be a hardware problem with the camera. In that case, it may be necessary to contact the manufacturer or a qualified technician for further assistance.

A circuit or wire short will need to be diagnosed with a meter or send out for repair

eBay has number of replacement choices...www.ebay.com