20 Most Recent Power Privilege and Law : A Civil Rights Reader - Page 7 Questions & Answers

The mecanism of the push button must be broken you have to replace it or make it replace... You can find a way to do it here : https://www.doityourself.com/stry/how-to-fix-a-broken-switch-on-an-electric-fireplace

A clue to what it is you have may help you get an answer.

Speakers do not connect to turntable. you will need an amplifier with phono preamp This unit uses RCA connectors. https://manualsbrain.com/en/manuals/1257166/?page=5

send it out for repair they can give you an estimate if worth repair or replace

search for repair shop where you live

Larry Ng Sep 19, 2021

buy it remove old put new in or take it to a repair shop, why not to that? (no need to learn skills) let others do it. this a wireless or USB speaker that fails on PC big time (reviews bad) iLive Platinum ISWFV387G Bluetooth(R) Speaker with Amazon(R) Alexa(TM) it has uSB charging cable, new, no power pack. what jack is damaged , ? I guess you mean the bottom jack DC input, AUX in, that is broken, well you need soldering skills to do that and the jack will not be easy find due to 1000 types made.

Sometimes this information is marked on the back of the unit somewhere near the power in socket. It will usually be ridiculously small text and almost impossible to read. I use my camera phone to take a picture of it then I can use the Zoom feature to read it better. It is often printed directly on the plastic body, on a sticker or moulded into the actual plastic. You are looking for the "In" reference on these details.

sadly I would bin it

It could be an issue with your laptop computer it's self then and it needs to be repaired by someone that fixes computers. A power supply issue with the actual computers it's self then.

lost the DC power pack you did.most are wall wart power packs,. not power cords (simple wire)it is DC power pack to run the DC motor inside the ANTENNAAC to DC power pack it is, and the voltage must be correct. not guessing and for sure amp rating at least same as original or the rotor motor will fail.

Hi, you can contact Service at: Tel: 0861-CONLOG Tel: +27 (31) 268-1227 Email: [email protected] https://www.conlog.com/

You sure it's not a radio?

IT SOUNDS LIKE IT NEEDS BATTERY REPLACEMENT

That makes no sense. Make and model with OS of computer would be a start.

Your Screen connectors might have detached,kindly check that

i never turn mine off just close the lid (screen)

If it is new as you state, return it for a replacement/refund.

Do you know anyone with a similar Jitterbug? It would help tremendously if you would try charging your battery in someone else's charger. If the battery charges then your charger is the problem and not the battery. Useful to know. I am assuming you have wiped all the contacts with alcohol or contact cleaner, to remove any thin film that might be interfering with electric conduction. Quite often that persistently blinking charge light indicates a battery that has reached the end of its useful life. If you buy a new battery be certain to charge it at least 14 hours before you ever put it into the phone. I repair a lot of digital cameras, watches, cell phones, etc. And contacts that need cleaning or degreasing are quite common.]

What are you measuring across? Ground is ground and you should be using that pin to measure all others.

https://electronicscoach.com/difference-between-linear-supply-and-switch-mode-power-supply.html#:~:text=Difference%20between%20Linear%20Supply%20and%20Switch%20Mode%20Power%20Supply&text=The%20Linear%20power%20supply%20converts,DC%20voltage%20into%20desired%20voltage.