Rival Food Slicer - Answered Questions & Fixed issues


If you need the grey plastic type, I can't help; but, if you need the metal type, I probably can. I normally stock recycled threaded shafts and thumb nuts for old Rival and Magic Hostess metal-framed (not folding plastic) slicers. I also have new rubbers suction cup feet and friction-reducing blade washers.


need-blade-retaining-nut-1da0kn30pxowr0ebacrfmmyb-4-0.jpg

Rival Food... | Answered on Jun 02, 2016 | 942 views


If you still have this problem, please provide details of the problem. Rival 1030 and 1101 series slicers had design changes over their run and several thickness mechanisms were used. Please describe; can you see the working parts or are they enclosed? Is the adjusting handle a crank like used on old-fashioned pencil sharpeners or more like those used on a manual can opener?

Rival Food... | Answered on Jun 24, 2015 | 347 views


If you still need these parts, contact [email protected] As of 11/25/14 I have both available - the parts are recycled, not new, but perfectly serviceable.

Rival Food... | Answered on Nov 25, 2014 | 304 views


If you still need this blade, contact [email protected] as of 11/25/14 I have a recycled one in stock. Also have new suction cup feet, blade-washers and rubber motor dampers (where motor touches frame).

Rival Food... | Answered on Nov 25, 2014 | 164 views


Welcome..!!!!!

Rival Food... | Answered on Nov 25, 2014 | 763 views


Rival changed methods of blade attachment over the years, even within the same model designation. If what you need is the one or both of the pieces illustrated below, I often have salvaged parts. Ask for Threaded Shaft or Thumb Nut (two styles, interchangeable) or both,
. rival-electric-food-slicer-model-vtdpjfyeb3b45iy5l4cxbybs-3-0.jpg rival-electric-food-slicer-model-vtdpjfyeb3b45iy5l4cxbybs-3-3.jpg

Rival Food... | Answered on Oct 21, 2014 | 977 views


New blades have been unavailable for years.
In most cases, I can have your Rival 1005 thru 1030 or 1101 blade professionally sharpened and returned to you for less than the cost of a used blade. mailto:[email protected]

Rival Food... | Answered on Sep 05, 2013 | 554 views


Still available on eBay or by contacting direct. mailto:[email protected]

f828512d-b543-496c-8b93-f735deedb345.jpg


rival-food-slicer-parts-irggf4xa05cvmm0earr131af-5-2.jpg

Rival Food... | Answered on Sep 05, 2013 | 553 views


I'm a little late 8-(, but, if you still need one, I can provide a recycled one.

I also have newly-made replacment rubber suction cup feet, friction-reducing blade washers (go between blade and blade head) and rubber bumpers (alll three varieties) that attache to the foot on the slicer motor to reduce noise.

[email protected]

Rival Food... | Answered on Mar 30, 2013 | 178 views


Sorry to read about your problem, I hope this helps you out.

you will need to contact Rival at RivalProducts.Com. I dont think they have a blade replacement
But give them a try.

I tried to help you. Please help me and Rate/Vote on my response. We take the time to answer your question. take the time to rate us.Thanks and good luck

4 Thumbs - Very Helpful
3 Thumbs - Helpful

Rival Food... | Answered on Dec 30, 2010 | 239 views


RIVAL WILL BE THE ONLY PLACE YOU COULD POSSIBLY GET ONE

Rival Kitchen... | Answered on Nov 21, 2020 | 11 views


Your best optionis to contact Rival directly. Alternatively go to your local high street service centre.

Rival Kitchen... | Answered on Mar 25, 2019 | 132 views


1. Place the REMOVABLE ROASTING PAN into the ROASTER OVEN BODY.
2. Make sure that the TEMPERATURE CONTROL is in the OFF position, then plug cord into a 120 volt AC outlet.
3. Turn the roaster on by turning the TEMPERATURE CONTROL to the desired temperature.
4.Preheat for 15 to 20 minutes. (INDICATOR LIGHT will shut off when temperature is reached)
5. Place ROASTING RACK into the REMOVABLE ROASTING PAN, put food on the RACK, and place the LID on the roaster oven.
NOTE: Some foods or recipes do not require the ROASTING RACK to be used.
6. When finished, turn the TEMPERATURE CONTROL to the OFF position and unplug roaster oven from outlet.
7. Remove
if it plugged and plugged to roaster and it still does not work move a known working plug. still does not work, there is no repair.

Rival Kitchen... | Answered on Nov 23, 2018 | 122 views


See if the following suits your slicer:

HOBART or RIVAL FOOD SLICER Replacement SCREW IN FEET RUBBER PAD or...

The slicer predates 2014. Sears parts division has offers some Rival replacement parts. You might try them if the above source does not pan out. There is also a heritage parts outfit that might have something. The ebay listing for this part in particular does not list any as currently available. But one on the above leads may help.

Rival Kitchen... | Answered on Aug 04, 2018 | 259 views


for a vacuum machine to work the valves have to be functional
as the piston/diaphragm moves back to suck out the air there is a one way valve that shuts of as the piston / diaphragm moves back for another cycle
it is possible that there is food particles stuck under that valve thereby stopping it from sealing off

Rival Kitchen... | Answered on Aug 02, 2018 | 55 views


Need more answer to provide answer.

I suggest entering the model into http://www.google.com or http://www.amazon.com to see what is for sale.

Rival Kitchen... | Answered on Apr 28, 2018 | 32 views

Not finding what you are looking for?
Rival Food Slicer Logo

38 questions posted

Ask a Question

Usually answered in minutes!

Top Rival Kitchen Appliances - Others Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

Paul Carew

Level 3 Expert

3527 Answers

Brad Brown

Level 3 Expert

18520 Answers

Are you a Rival Kitchen Appliances - Other Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...