20 Most Recent
Rival Food Slicer Questions & Answers
Need a blade retaining nut
If you need the grey plastic type, I can't help; but, if you need the metal type, I probably can. I normally stock recycled threaded shafts and thumb nuts for old Rival and Magic Hostess metal-framed (not folding plastic) slicers. I also have new rubbers suction cup feet and friction-reducing blade washers.
The thickness gage is stuck
If you still have this problem, please provide details of the problem. Rival 1030 and 1101 series slicers had design changes over their run and several thickness mechanisms were used. Please describe; can you see the working parts or are they enclosed? Is the adjusting handle a crank like used on old-fashioned pencil sharpeners or more like those used on a manual can opener?
I have a rival electric food slicer model #
Rival changed methods of blade attachment over the years, even within the same model designation. If what you need is the one or both of the pieces illustrated below, I often have salvaged parts. Ask for Threaded Shaft or Thumb Nut (two styles, interchangeable) or both,
10/21/2014 10:00:47 PM •
on Oct 21, 2014
Looking for a replacement Spur clamp/food pusher
I'm a little late 8-(, but, if you still need one, I can provide a recycled one. I also have newly-made replacment rubber suction cup feet, friction-reducing blade washers (go between blade and blade head) and rubber bumpers (alll three varieties) that attache to the foot on the slicer motor to reduce noise. [email protected]
Not finding what you are looking for?