Manitowoc 450 Lb Ice Cube Machine Self Contained Air Cooled SSeries SD0452A - Answered Questions & Fixed issues

Sorry we do not sell parts here.

most likely you have bad ice thickness probe.

When a Manitowoc goes into clean mode,It stays in clean mode until it finishes.If you turn it off and then on again,it just keeps cleaning.Let it run in cleaning mode until it finishes

Sounds like a sticking relay. Call for service. The control system is very complex.

When was the last time it was serviced? They need doing every year, clean coils, sanitize and descale. https://www.google.com/search?q=manitowoc+neo+ice+machine+not+harvesting

Manitowoc - Engineered For Ease

Manitowoc Ice https://www.manitowocice.com Manitowoc Ice 2110 South 26th Street Manitowoc, WI 54220. Phone: 920-682-0161. For Sales 920-682-0161. Facebook; Twitter; YouTube; LinkedIn. ‎Products · ‎Contact · ‎Service · ‎Downloads ..

Greetings, when this occurs, please add some salt to the idea in order to stop the ice from sticking together as much. That's the temporary fix. For any other machine, I would think this was an oil issue. That's the parts that create the ice stop-up due to friction caused by a lack of oil. I'm guessing that every time you clean the machine, you decrease the friction between its parts due to the water/soap that you use, but then the oily soap residue gets used up, and the issue returns. Please test out my idea. Thank you.

is it plugged into a new or older outlet,and is it plugged in by itself,with no other appliances effecting its power

Possible un defrost cycle

First, this us a very old system and probably needs to be replaced if it really is an R12 system. The unit is probably at least 40 years or more old since they stopped producing R12 about 1970's. If your manitowac ice machine is usable still, it probably has lost its charge and will need to be refilled with a suitable refrigerant. I actually still have a jug of R12, but I generally charge systems with the only substitute still available R420 if you can find someone who still sells it. I saw that both refrigerant were being phased out and purchased a couple of jugs and only have a little left. My suggestion if you want this ice machine in operation again take it to an ice machine repairman and have him repair it. Good luck.

High Pressure warning. Usually overheating of compressor. Check that ventilation is not blocked.

Hi, contact your local appliance repair facility, you may have problems with the control board, the ice level sensors or curtain.

Check compressor, is it running? If you need further help, I’m available over the phone at https://www.6ya.com/expert/jerry_8a145f1328fa119f

nickel safe green stuff. FDA approved. check my service call video on Manitowoc deep clean.

water pump

You might need maintenance done by profi.

Go to, www.manitowacicice.com/minisite/service/servicedownloads

You should have this done by a service company.

Depends on ambient temperature but in general yes. Plates may need cleaning or may have worn out. Don't know model and serial number of the inside head. You may want to look up your service manual here http://www.manitowocice.com/?xhtml=xhtml/mii/us/en/homepage/default.html&xsl=homepage.xsl and compare your pressures to the posted norms.

When a Manitowoc is turned on in clean mode, It stays in clean mode until it finishes (about 30 minutes).If you turn it off and then on again,it just keeps cleaning. Let it run in cleaning mode until it finishes then turn the witch to ice mode.

Unfortunately nowhere. These are a budget item sold by QVC and JC Penney and there is no support. https://www.google.com/search?q=COOkS+txg-dt16A+repair+manual Parts, except there isn't any. https://www.google.com/search?q=COOkS+txg-dt16A+parts ....