20 Most Recent
Lite On LVW-5007 - Page 8 Questions & Answers
How do i get my tv off standby mode?
To get your TV off standby mode, you can try the following steps:
Check the power source: Make sure that your TV is properly plugged into a working power outlet or surge protector.
Check the remote control: Press the power button on the remote control. Sometimes, the TV may be in standby mode due to a problem with the remote control. If the remote control is not working, try replacing the batteries or using a different remote.
Check the power button on the TV: If the TV does not turn on with the remote control, try pressing the power button on the TV itself.
Unplug and plug back in: Unplug the TV from the power source for at least 30 seconds and then plug it back in. This can reset the TV and may help to get it out of standby mode.
Check for a timer: Some TVs have a timer function that automatically puts the TV in standby mode after a certain amount of time. Check the TV settings to see if this feature is enabled.
If none of the above steps work, there may be an issue with the TV's hardware or software. In this case, it may be best to contact the manufacturer or a professional repair service for assistance.
I INSERT TAPE IN PLAYER, IT STARTS TO PLAY, THEN PLAYER SHUTS OFF?
Please don't post in all CAPS Myra, it is considered SHOUTING, rude and is harder to read.All question need full 'make model (what it is)' as the first 3 words in every question.Audio cassette player, video cassette player, DAT Tape player, video camera player? You see the problem? It needs fixing by a qualified technician, it is not a home fix. Overheating, microswitches not operating when the tape is inserted. Logic board faulty. It has to be 20 to 50 years old?
Why does it keep shutting off?
Greetings,
I'm not seeing the proper name of your device, so I have to assume that it's an electronic water dispenser of some sort until you tell me otherwise. Please unplug the device for 1 minute and then plug it back in and check if they issue occurs over the next hour or so.
Thank you.
My tv is LF2612D 26"LED TV combo I can't get it out of home and retail mode setting
To get your LF2612D 26" LED TV combo out of home and retail mode, you can try the following steps:
- Press the "Menu" button on your remote control to access the TV's settings menu.
- Use the arrow keys on your remote control to navigate to the "Setup" or "Installation" option.
- Look for an option called "Home/Shop Mode" or "Retail Mode". If you find this option, select it.
- Change the setting from "Shop" or "Retail" mode to "Home" mode.
- If you cannot find this option, try resetting your TV to factory settings. This can be done through the TV's settings menu or by pressing and holding the power button on the TV for 10 seconds.
- If the issue persists, refer to the TV's user manual or contact the manufacturer's customer support for further assistance.
Does this video record the road while driving
Probably if it is a dashcam. It is is a home television, or a home video camera / player no, because the extension lead wouldn't be long enough. You could have a generator in the trunk though.
All questions need FULL 'make model (what it is)'.
My proline W258CUQ remains dark, even if I try turning the brightness higher. Please help
It sounds like there may be an issue with the display on your Proline W258CUQ laptop. Here are a few troubleshooting steps you can try to identify and resolve the problem:
- Check the brightness settings: Make sure that the brightness is not set to the lowest level. You can adjust the brightness by pressing the Fn key along with the brightness key, usually represented by a sun icon.
- Check for external factors: If you are using your laptop outdoors or in a brightly lit room, the screen may appear dark due to the ambient lighting. Try moving to a dimly lit room or using a laptop screen hood to block out the light.
- Update the graphics driver: Check if there are any updates available for your laptop's graphics driver. You can do this by going to the manufacturer's website or using a third-party driver update software. Or vice versa, try to roll back the driver update.
- Restart the laptop: Sometimes a simple restart can fix the problem. Shut down your laptop, wait for a few minutes, and then turn it back on.
- Check the display cable: If the above steps do not work, it is possible that there may be an issue with the display cable. You may need to take the laptop to a technician to have it checked and repaired.
If none of these steps work, it may be best to contact the manufacturer or a qualified technician for further assistance.
How do I reset Onn Soundbar model 100069413 with or without using the remote control?
To reset your Onn Soundbar model 100069413, you can try the following steps:
- Using the remote control:
- Press and hold the "Volume Down" button and the "Source" button on the remote control simultaneously for about 5 seconds.
- The soundbar should turn off and back on, indicating that it has been reset to its default settings.
- Without using the remote control:
- Unplug the power cord from the soundbar and wait for about 30 seconds.
- While the power cord is unplugged, press and hold the "Power" button on the soundbar for about 5 seconds.
- Reconnect the power cord to the soundbar and turn it on.
If these steps do not work, you may need to refer to the user manual or contact the manufacturer for further assistance.
Does the flow sensor have anything to do with the sleep indicator?
You posted to the Category Televisions and obviously not that. There are over 10,000 categories to choose from.
All questions need FULL 'Make model (what is is)' as the first 3 words in every question. The site software should suggest the right category, or you can choose.
'flow sensor; 'timer', 'sleep indicator'? Water Bed? Dehimidifier? Hot tub? AC Unit? Water Cooled PC? Well Pump? Sump Pump?
It is all guesswork.
Not finding what you are looking for?
