20 Most Recent
Lite On LVW-5007 - Page 7 Questions & Answers
TCL 55p6US black screen repair please?
Try unhooking one flat ribbon board at a time and see if you get half a picture, if you do the panel is bad and the set isn't repairable, if still no picture replace the main board, it still could be a panel issue but replacing the main would confirm this
To remove my standby blue light
If you're trying to switch on your TV and the standby light is still on, it could be an indication that there's an issue with your TV. Here are some steps you can take to troubleshoot the problem:
1. Check the power source: Make sure that your TV is properly plugged into an electrical outlet and that the outlet is functioning correctly. You can test the outlet by plugging in another device and seeing if it turns on.
2. Check the remote: Make sure that your TV's remote is working properly and that the batteries are not dead. Try using the power button on the TV itself to see if that turns it on.
3. Check for a power surge: If you've recently experienced a power outage or power surge, your TV's internal circuits may have been damaged. Unplugging the TV for a few minutes and then plugging it back in can sometimes help to reset the system.
4. Consult the manual: Check the user manual for your TV to see if there are any troubleshooting steps you can take specific to your model.
If you're still having trouble turning on your TV, it may be time to contact a professional for help.
How do you fix a showy VHS
If you are experiencing issues with a snowy VHS tape, here are some steps you can take to try to fix it:
Clean the VCR heads: Over time, the heads of the VCR may become dirty or clogged with debris, which can cause a snowy picture. Try using a VCR head cleaning tape or a soft, lint-free cloth and rubbing alcohol to gently clean the heads.
Adjust the tracking: Use the VCR's tracking control to adjust the alignment of the tape. This may help improve the picture quality and reduce snowiness.
Replace the VHS tape: If the tape is old or worn, it may be causing the snowy picture. Try using a new or different VHS tape to see if the issue persists.
Problems with hisense android tv What could be cause?
Hi Wendy, this model Hisense tv has issues with the tcon board causing exactly what your seeing, it's the smaller board in the center bottom of the set, unfortunately finding this board won't be easy. Get the part number on the board veses try to find it by model, they used a couple different tcons in this model set
How do i get my tv off standby mode?
To get your TV off standby mode, you can try the following steps:
Check the power source: Make sure that your TV is properly plugged into a working power outlet or surge protector.
Check the remote control: Press the power button on the remote control. Sometimes, the TV may be in standby mode due to a problem with the remote control. If the remote control is not working, try replacing the batteries or using a different remote.
Check the power button on the TV: If the TV does not turn on with the remote control, try pressing the power button on the TV itself.
Unplug and plug back in: Unplug the TV from the power source for at least 30 seconds and then plug it back in. This can reset the TV and may help to get it out of standby mode.
Check for a timer: Some TVs have a timer function that automatically puts the TV in standby mode after a certain amount of time. Check the TV settings to see if this feature is enabled.
If none of the above steps work, there may be an issue with the TV's hardware or software. In this case, it may be best to contact the manufacturer or a professional repair service for assistance.
I INSERT TAPE IN PLAYER, IT STARTS TO PLAY, THEN PLAYER SHUTS OFF?
Please don't post in all CAPS Myra, it is considered SHOUTING, rude and is harder to read.All question need full 'make model (what it is)' as the first 3 words in every question.Audio cassette player, video cassette player, DAT Tape player, video camera player? You see the problem? It needs fixing by a qualified technician, it is not a home fix. Overheating, microswitches not operating when the tape is inserted. Logic board faulty. It has to be 20 to 50 years old?
Lost all ITV channels after retuning ?
If you have lost all ITV channels after retuning your TV, there are a few things you can try to troubleshoot the issue:
1. Check your TV aerial or cable connection: Make sure your TV aerial or cable is properly connected to your TV and that there are no loose connections or damage to the cable.
2. Check your signal strength: Poor signal strength can also cause you to lose channels. Use your TV's signal strength checker or a signal meter to see if you're getting a strong enough signal.
3. Check for any planned maintenance: Sometimes, channels can be temporarily taken off-air due to maintenance work or other technical issues. Check the ITV website or social media channels for any announcements regarding maintenance work.
4. Perform a full factory reset: If the above steps don't work, you can try performing a full factory reset on your TV. This will erase all your saved channels and settings, so be sure to have a list of your favorite channels handy to help you set it up again.
5. Contact your TV service provider: If you're still having issues after trying the above steps, it may be worth contacting your TV service provider for further assistance. They may be able to send a technician to investigate and fix the issue.
Why does it keep shutting off?
Greetings,
I'm not seeing the proper name of your device, so I have to assume that it's an electronic water dispenser of some sort until you tell me otherwise. Please unplug the device for 1 minute and then plug it back in and check if they issue occurs over the next hour or so.
Thank you.
How to Aftron tv aging mode exit
If the buttons on your Aftron TV and remote are not working and you are stuck in the aging mode, you can try the following steps to exit the mode:
1. Unplug the TV from the power source and wait for at least 30 seconds.
2. Press and hold the power button on the TV for 10 seconds.
3. Release the power button and plug the TV back into the power source.
4. Turn on the TV using the power button on the TV itself.
5. Once the TV is on, go to the menu and look for the option to disable the aging mode. This may be located under settings or picture settings.
6. Disable the aging mode and save the settings.
7. Turn off the TV and unplug it from the power source for 10 seconds.
8. Plug the TV back in and turn it on to see if the issue has been resolved.
If these steps do not work, you may need to contact Aftron customer support or a qualified technician for further assistance.
Making a banging noise when on
If your device is making a banging noise and you've identified that the red button at the back is causing the noise, it may be an issue with the power supply or a faulty component in the device. Here are some steps you can try to troubleshoot the problem:
1. Check the power supply: Ensure that the device is receiving the correct power supply, and that the power source is stable and not fluctuating. If possible, try a different power source or adapter to see if that resolves the issue.
2. Check the internal components: If the noise persists, it may be due to a faulty component inside the device. If you are comfortable with electronic repairs, you can open the device and inspect the internal components to check for any visible damage or loose connections. Otherwise, it may be best to take the device to a qualified repair technician for diagnosis and repair.
3. Contact the manufacturer: If the device is under warranty or you are unsure of the cause of the issue, you can contact the manufacturer for assistance or to arrange for repair or replacement.
It is important to address any unusual or persistent noises from electronic devices, as they can indicate a potential safety hazard or further damage to the device if left unaddressed.
Not finding what you are looking for?
