Top 20
Lite On LVC9006 DVD Player/VCR Questions & Answers
Vhs tape stuck
eject and pull out the tape by force, then you will see some of the tape in where its hung up, cut the tape and splice back together with scotch tape, (unless it is a rented movie) then you have to take it to a repair man have it removed.
Dvd section stop working it won't read the disc
I am just wondering whether the dvd has condensation , which is stopping it working.
If you can eject the disc then turn off dvd.Take it into a warm room , turn it on and leave for 2-3 hours.
Then try again.
Well this a solution that needs to be done before looking at other programs.
DVD gives an invalid Disc Error
This is quite easily, cause by ONE reason. The thing is, the lens is very very dirty, or had broken, try to replaec it if u can, or try cleaning it with cotton.
Failure in tape to disc transfer
what kind of software are you using. I have had problems with this type of transfer and I had to use a special transfer device. If you want to know about the device write back and I will tell you how I did it.
Remote buttoms non functioning
First of all try to watch the IR LED through a photo camera, while you are pressing the buttons. If you see it pulsating, then there is nothing wrong with your remote.
This is one way to repair your remote:
1- Open it. On the back face you'll see black spots of rubber. Try to clean them gently with a piece of cloth and some isopropylic alcoohol. If you have multimeter try to check the resistance of the spots. It should be less than 100 ohms. If the resistance it is bigger I suggest you to cut small pieces of thin foil (the one use in the cigarettes packs it is excellent). Then put very small amount of super glue on the black spots and above this the thin foil. Use a tweezers. Also you can clean the PCB. Check all the soldering point. Then try it if it works. Goodluck.
Lost remote, need to know what code number is
A universal will not allow you to do all the things the unit does,it will let turn on and off but the menu and settings might only be accesed with the original remote.Try this http://us.liteonit.com/us/index.php?option=com_wrapper&Itemid=75
I need a remote code
I've got a Lite-On DVD recorder and needed a code to sync it with my ARCHOS system. I found that the only code that corresponded with the 'ilo' products worked...
TLX-04243B Dead set Red blink lite on right front corner
Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices.
http://homenol.blogspot.com/
http://electronicshelponline.blogspot.com/
If blinks continue without any pause, the main board is faulty.
Search the site by type in the "
brand name" to your device, in the "
Search box at the top right of the display window of the Homepage" to get gathered related posts.
1/17/2017 1:45:15 AM •
Lite On...
•
138 views • 0 helpful votes
Dvd wont eject
Look for a tiny hole in the front of the tray. Use a paper clip to press in on it. Should pop out easily.
11/4/2013 12:34:39 AM •
Lite On...
•
74 views • 0 helpful votes
When i turn on my
There is a capacitor on the power supply board that needs to be changed, if memory serves me it is a small 220uf capacitor, the recommended replacement is 470uf capacitor with a higher voltage rating.
3/17/2011 10:56:10 PM •
Lite On...
•
372 views • 1 helpful votes
Dvd door won't open
try turning it off or on. if that does not work it might be broken and needs to be replaced or fixed.
3/6/2011 4:26:54 AM •
Lite On...
•
56 views • 0 helpful votes
Hi, I have a Lite
Sorry I did not understand your question. You said, " only get sound from my TV when I play vidio H/D or Disc.
Picture is OK."
You get only sound or video? WHich one is it? Also please let me know the input you are using.
Sai.
1/6/2010 12:50:22 PM •
Lite On...
•
61 views • 0 helpful votes
Not finding what you are looking for?