20 Most Recent
Lite On LVC9006 DVD Player/VCR - Page 2 Questions & Answers
-DVD Door will not open :(
Hi,
FIrst switch Off the power supply.There is a hole just beneath the DVD tray. take a thin wire or unfold a office paper clip.Push the wire gently and the DVD will come out. There can be a mechanical failure, due to which it happened. switch On power supply, take our DVD try two -three times, if it works normally then i think ou problem is solved
12/25/2013 7:39:08 PM •
Lite On...
•
Answered
on Dec 25, 2013
Dvd wont eject
Look for a tiny hole in the front of the tray. Use a paper clip to press in on it. Should pop out easily.
11/4/2013 9:32:57 AM •
Lite On...
•
Answered
on Nov 04, 2013
When i turn on my
There is a capacitor on the power supply board that needs to be changed, if memory serves me it is a small 220uf capacitor, the recommended replacement is 470uf capacitor with a higher voltage rating.
3/17/2011 11:07:55 PM •
Lite On...
•
Answered
on Mar 17, 2011
Dvd door won't open
try turning it off or on. if that does not work it might be broken and needs to be replaced or fixed.
3/6/2011 4:28:20 AM •
Lite On...
•
Answered
on Mar 06, 2011
DVD Recorder LVW5101. Unit records
At present, I assume I hard several defective Discs. I use DVD-RW and have had good results. I also think I am having problems with Erased Discs. I need to do more experimenting. Thank you for your respoonse. I will keep you response in caseof further problems.
1/21/2010 9:42:35 PM •
Lite On...
•
Answered
on Jan 21, 2010
Hi, I have a Lite
Sorry I did not understand your question. You said, " only get sound from my TV when I play vidio H/D or Disc.
Picture is OK."
You get only sound or video? WHich one is it? Also please let me know the input you are using.
Sai.
1/8/2010 1:44:18 AM •
Lite On...
•
Answered
on Jan 08, 2010
Hi The disc tray has remained closed with a dvd
There is an easier way to remove the cd from the drive than to visit a professional. There is always a hole in the front of the drive, may be on the try front or just below it. If you insert a paper pit into this hole and press a little when resistance is felt, the tray will slide open as the pin releases the lock. And your CD is sitting there. Happy Holidays.
12/22/2009 6:02:32 PM •
Lite On...
•
Answered
on Dec 22, 2009
He dont recognize the disk
Put a disc in with the label facing up and note the orientation (ie rotation) then when the disc ejects, see if it's in the same orientation (rotation). If so, the motor is not spinning the disc and it would need to be serviced.
-=/ MLF /=-
10/20/2009 5:56:42 AM •
Lite On...
•
Answered
on Oct 20, 2009
Not finding what you are looking for?