20 Most Recent Pentax MZ-60 QD 35mm SLR Camera - Page 9 Questions & Answers

Usually means that either the film has not been exposed, or has been so grossly underexposed that the images do not register. Try firing the camera without film, but with the back open, and see if a) the shutter works, and b) the lens aperture opens and closes as it should. May need a service, which can be expensive.

I would try ebay. Check for sellers who sell serviced and reconditioned cameras. They will often have spares salvaged from cameras broken beyond repair.

Avoid cameras sold for spares or repair. This is often used as an excuse to sell junk, but not always.

A reputable seller who sells for spares sholud be able to tell you if a particular part is functional or not, and will refund if they turn out to be mistaken.

I'm sure you think you know what you mean - care to give the rest of us a clue ? Make and model of camera, at the very least, please.

Advertise

its a type of battery, 3v li-ion

The shutter wont fire till the film fully wound on to next frame. check for corrosion in battery compartment.

screen is dying, dead pixels.

turn on/off switch to off.

if its a pan and tilt tripod the rotate the arm sticking out to lock the tilt.

Have you contacted Oben? they may be able to help. https://www.obensupports.com/contact-us

here is the link Solvusoft Microsoft Gold Certified Company

look on ebay for your model number and brand.

clean contacts on battery terminals. https://hallmark.custhelp.com/app/answers/detail/a_id/3918/~/how-to-clean-a-battery-compartment-containing-corroded-alkaline-batteries.

https://www.manualslib.com/ Try here

Probably either the manufacturer or Ebay

it is not necessary

Using http://www.google.com and the words coby DP-758 manual the following manual was located. https://www.manualslib.com/manual/223658/Coby-Dp-758.html Coby DP 758 Instruction Manual

Follow the instructions in the manual ?

Try the printer nozzle cleaning and nozzle alignment facilities, after printing a test page for problem ananlysis

Try restarting machine.