20 Most Recent Nokia 6700 Slide Cell Phone - Page 4 Questions & Answers

I don't have this particular phone, but generally the sim card in under the battery. Before you start, make sure you have all your contacts and stuff stored on the phone, not the sim, or it all goes bye-bye when you change the sim. Snap off the back of the phone. Don't pry the battery out. Usually you have to look for 2 tiny little "latches" that hold it in. Sometimes there is a lever that you push to release the battery. Then you can see the sim card. Sometimes you release a little metal clip that holds it down. On other phones, you just slide the card out from under the metal holder. Pay attention to which way the card is turned, and don't put the new one in upside down. Then reassemble the phone.

If callers cannot hear you, you may have to replace or repair the mic. Since you can hear them, the speakers are working.

The subject of unlocking country code has already been discussed and explained by members of FixYa. Its risky and not advisable. Some websites offer services for a fee. You can also try a service centre.

Possible there are errors in the PC and so the phone is not recognised. You can transfer the pictures by removing the micro sd card and inserting on a card adapter to be directly read on the card reader on the laptop. If this is not possible you can activate bluetooth on the phone and laptop and get the files transferred easily after detection.finally remove any programs particularly if a phone was installed earlier and reinstall the Phone.Get tips from the link below:

http://cellular.wirenode.m/obi.http://www.nokia.co.id/dukungan/software/nokia-pc-suites/compatibility-and-download#

The mic of this particular phone is attach in the main strip we can replace it by making jumper or you can change the strip to solve this problem.And if the problem the main board try to refer the attachmentsI've just download this image from other link and edit it for you.Good luck

Your phone is not detecting Sim Card .The problem might cause from the Sim Case or Sim Card Filter (IC) so contact nearest repairing shop or if you are a mobile tech try to make jumper.this is the best way that i can help you.thanks

ok first go to profiles aqnd in that general open it go for personalise in that check for vibrating alert make it on .....come back and above personalise you can see activate activate it and use.

Good day. Meaning your phone is locked from the previous network. reformat to unlock the code, so you can use it to any network possible. Thanks

just restore default setting go to setting phone setting and restore original setting. make sure you save numbers to sim and files to memory card.

Good day. remove the battery and memory card, then try to open after awhile. Erase all the files from your phone memory, never use the phone memory for storing large files, this may cause your phone of getting slow and get freeze. If still not work, I advice you to reformat your phone for better cure. Thanks

Good day. My advice go to the nearest cellphone technician on your area, its the power button that dont work properly. M sure the technician will do a replacement button for your phone. Thanks

contact your service provider..

if you have any reparing box than you make a solw your set onother you need reparer

the default is 12345. if it has been changed, then you have to take to a nokia service center and they either reset it or read it for you using computer and some special software and tools.

Here is the procedure,you can do it by yourself

First download and install Pheonix from this link. Nokia Phoenix Service Software 2011 - Download secondly Download flash file from this link Nokia flash file and install it to C / program files/pheonix.. after finished this installation open pheonix . Inside the interface at the> top left <there you see "File" click there and choose "open file" and then select the approprait Product type i.e "which is written on the back panel inside the battery of every Nokia(Type RM-000).After doing this again at the left top count from "File"1..2..3..the 4th one is "Flashing" press there, when you click there you'll see three sub-menus, just select the "Firmware Update" again you'll see another interface. Look at the product code there should be blank and put your "mouse tool" at the straight end from the "Product Code" there is a Button and choose the code which is written in the back side of your phone. e.g CODE:0000000.if the same code does not found just take one which is higher. After this you can see "Dead phone USB flashing" click that box. Now this is the last stage... Connect your phone with the USB to your PC and let the driver install ...wait for a moment.(If your phone working).Lastly after just finished (In case your phone is Dead, unable to switch on in normal mode start from here) Connect the phone to pc without powering...insert good battery and Click the "Referbish" button after this, a message will prompt you "press power botton" etc. insert charger or press it and wait until the phone will Restart automatically in normal mode 10-15 minutes. If you cannot understand just leave a Comment. thanks for visiting fixya. Good luck.

NB: For your Flash File, after you get the Nokia flash file i.e Blue Nokia just click to bb5 support there you will see different Models of NOKIA . You can choose you phone there.Please download what is the particular phone type.