20 Most Recent LG Ally Cell Phone - Page 3 Questions & Answers

PUK CODE is provided by your SERVICE PROVIDER
Call your service provider customer service from another mobile or phone

Hi. Plug your phone to the computer and use the software provided by Lg to transfer the game. Or open the phone with your windows browser like it was a pen drive look for the games(folder) and copy the game there. Good luck.

You can get the unlock code through online..........give your IMEI number and get the unlock code for ur mobile.... i will suggest the website Unlock-Zone.com which is doing good service .....you can approach this website.
This site is nearly perfect and they were recommended highly in the cell phone forums. I used them to unlock my cell phone. contacted them and within 30 mins i had my unlock code and my phone was unlocked.
Hope this helps.

pull up your text and put your finger on the text you want to delete and hold it till a window pops up and hit were it says delete

try taking the battery out for like 5 mins and then start it back up that should work

hello,this could be caused by two things, 1.having your message centre number deleted:this could be fixed by following the steps below, menu>messages>message settings/profile>message centre number,there you would find the digits,it has a default 12digits number preinstalled on the sim card by your service provider,you can call them to collect the message centre number so as to enter it correctly,it will be giving to you for free. 2.it could be a network problem,kindly call your service provider customer care so as to confirm if they have network problem.
take care.

Remove the battery from your phone for about 1 minute and then re-insert it. That should reboot your device. If it still doesn't work, try doing a factory reset.

Hi,What causes phones not to ring out is when the ringer that makes you hear a tone when someone calls is damaged and does not work properly again.

The ringer is located inside the phone.You can get access into the phone by unscrewing the phone with a phone screw. It a little bit technical when unscrewing the phone.Just be careful not to damage the phone.

How to unscrew the phone.

Remove the back cover of the phone where the battery is,
then remove also the battery, at the edge you will see where the screw are located.(look closely).

After unscrewing,the screws, Open from the size of the phone,you will see where the ringer is located. It's usually round in nature. Remove and cover up the phone. (you can get a replacement ringer from any phone repair and sale of part store around you.

Ones your through with the ringer , 'wa la' Your done..

Note:if you can't loose the phone, in other not to cause damage to the phone,please contact a skill full personnel for assistance.Thanks.

Thanks for using fixya........


Before you replace it,you can also clean up the ringer ,there might be dirt stopping it from working properly.

Have a nice day.

Plug it into the wall charger. By design, it will turn on while charging. If it does not turn on, you'll know that you have some kind of hardware issue (like a problem with the charger connection or battery). If it does turn on, maybe you just have an issue with the on/off button.

Hello.

To reset your device (found online):

1. Power the device off. If it's frozen, pull the battery, then place it back in the device.

2. Press and hold the Volume Up, Home and Power buttons simultaneously.

3. Follow the setup instructions on the screen.

If still a problem, please explain if the screen is dark or blank or another condition.

Hope this helps.