Top 20 Mitsubishi VS-60803 60" Rear Projection Television Questions & Answers

The tv have a problems known as a convergence problems,it dead.Tv have colors lines R,G,B mis alignments,have colors shadows pictures or 3D pictures look alike?The tv convergence board have dead 2 STK convergence ICS and some or all it resistors too.By replacing all these parts on the tv convergence board to fixed it to solved the tv pictures convergence problems.The shop,will cost u like $300-350 for parts and labors.

The VS6983 Mitsubishi model is a analog televison and not HD capable.

replace the power relay the contacts are burned and, will not latch.

You might check the fuse, but I think you have more of a problem than that.

Hi Gloria,
Mitsubishi is the best DLP big screen on the market, ask your husband not to lose faith!
Mits had some issues with DLPs right around the time yours was manufactured, the issues did not affect all sets, I recommend contacting Mitsubishi Consumer relations @ 1-(800)-332-2119, explain to them your situation and the history of your TV and they will be happy to assist you, speak nicely,be professional and they will work with you.
Now, Mits did have some Thermocouple issues around that time, so I would ask about that, and they also had some optical block problems around that time, so I would bring that up also, I do not know if either of these are the problem with your TV, but I hope this gives you another avenue towards resolution of the TVs problem!

Good Luck !

What you want to do is first remove the mesh grill on the front. Just give a tug and it'll pop off. Then remove all the screws along the bottom of the screen. Now it should just slide up a few inches and come off. Be carefull, you have to disconnect the control panel. It'll have a little disconnect connector on it and will be visible once you pull the mesh off.

looks like the Green , RED and Blue are out of alignment and needs to be sent to the TV repair station for alignment

Not advisable. $500.00 is way over board what we charge for that repair. 250-300 max. I don't know of any shop or with our tech web site that charges that kind of money. I would still shop around.

convergence issue

Hi,
How old is this TV and that black bow is across the screen going from left to right?
Thanks.

menu -1-3-7-0
then inital
then enter

DO NOT DO THE E2 RESET!!!!

Let me know if you need more help

Tim nolan

to reset the whole tv press menu 1 2 3 enter

You have the typical convergence IC falure that every projection TV encounters at least once in its lifespan. The convergence ICs will both need to be repalce as it will only get worse. if you have no solid state repair experience, play it safe and call in a pro to assist you in this repair. Good Luck

greetings from belize take your set to a tech and have him look at it.good luck.

The lamp is not enabled possibly due to the colour wheel motor not turning. Any broken glass jamming it? Or the lamp ballast has failed due to an old/worn lamp.

Your Mitsubishi VCR HS-U580 looks to have a problem with the information rollers and drum. Here are some things to check: Look for something blocking the VCR or cassette compartment that would possibly be stopping the guide rollers. Check the belt that drives the VCR mechanism. If it is loose or broken, you may also need to substitute it. Clean the video heads using a head-cleaning cassette to make certain they're not dirty. See if the drum motor is working. If it is not spinning, there may be an issue with the motor. If the trouble persists, it's an exact idea to get assistance from a professional technician or contact Mitsubishi's purchaser support for advice. Be cautious when dealing with electronic devices, and if you are not certain what to do, it's great to get assistance from an expert.

i think finding a downloadable service manual for your Mitsubishi HS-U580 VCR might take some searching, but here are a few options: Check the official Mitsubishi website's support section. They might offer downloadable manuals for older models.Many online appliance parts stores like RepairClinic or AppliancePartsPros stock service manuals for various brands and models. Search for your specific VCR model to see if they have it available.Websites like ManualsLib or iFixit sometimes host user-uploaded service manuals. While the availability and quality can vary, it's worth checking. If online options fail, consider purchasing a physical copy of the service manual from online marketplaces like eBay or Amazon. Remember, some websites might charge a fee for downloading manuals. Always be cautious of suspicious websites and download from reputable sources.

http://www.manualsonline.com/support/mitsubishi/vcr/manual-262223 Try this site for your manual

You can purchase a replacement power cord for your Mitsubishi model #LT-55164 from TVserviceParts.com. The part number for the power cord is 246C638010 and it costs $18.40.

Question edited for clarity. Two questions merged into one. For sale https://www.google.com/search?q=Mitsubishi+HS-U781 Only a 780 Manual https://www.google.com/search?q=Mitsubishi+HS-U781+manual No Service Manual, but there is for 778 or U71 https://www.google.com/search?q=Mitsubishi+HS-U781+service+manual Specs https://www.google.com/search?q=Mitsubishi+HS-U781+specs ..