20 Most Recent
Mitsubishi VS-60603 60" Rear Projection Television Questions & Answers
Goes off after power on
This set may have the self check, if power light comes on and goes off press and hold both menu and input on front of set for five seconds and let both go.power light will blink a two digit error code, like one blink, two blinks with a pause and repeat it for about five times total.Let me know what if any code is found, the 1,2 is NO error is found.
Mitsubishi VS-60603 60
this was the perfect solution..my whole family thanks you for this information. It worked in two seconds!!
Loss of picture
Fixed this problem today..
Go to Menu > Setup > AV Connections (Select Home Theater) > "Locked to Input 1", select "No" or "Off".
Voila!
We lost power to the
IF SET will not go to inputs (they do not show) this model (circa 1998) does have a OPTION menu to do a hard reset with the Mitsubishi remote.
I have the information. Confirm model and I will tell you how to attempt this.
If this told you something you did not know, rate this solution and comment here and I will tell you how.
SD TECH
Hi Recently I had Direct Tv come out and add a dvr
So the power button on the TV itself, and the remote power button do not work? Neither one will get the TV to power on and stay on? If so that is a very bad sign for the TV and is unrelated to the directv...
Let me know if that's the case and I'll tell you what's going on here.
Thanks
Tim
After a quick power outage, we lost everything,
On my Dir.TV box is a door in the lower right front. Behind this door is a red button. Press it and turn the box back on if it doesn't come back on by itself. It will go through a reboot cycle of 5 to 10 minutes. That should get the satellite going but I'm not sure about the TV input problem. Do you have a menu button on the TV? If so you should be able to find a way to change the input. If not, find your model number, then Google "TV remote" and you should find sites that will sell you an original remote. They will have a box that you can enter your model # into and tell you your remote number. Then Google that part number and shop for the best price. Good luck.
When everything is plugged in
Hello Ryan. You have a loose connection within that tv. Your best bet may be to haul it into the local tv repair shop where they have the diagnostic tools and knowhow to find the short and repair it. J.
Not finding what you are looking for?