20 Most Recent Mitsubishi WS-55819 55" Rear Projection Television Questions & Answers

0helpful
1answer

TV does not power on - Mitsubishi WS-55819

The main power supply regulator section circuit fault. Either it will be a separate board, or the part of main board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size. Search the site by type in the "brand name" to your device; in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.
4/12/2017 5:01:39 PM • Mitsubishi... • Answered on Apr 12, 2017
0helpful
4answers

How can I attach an HDMI BluRay player to my TV

Blu-ray attaches to component inputs. Component cables are the red-green-blue cable and the red and white for sound.
Out on the blu-ray to 'In' on the TV.
Here is your owner's manual. see page 19
5/2/2015 7:13:25 PM • Mitsubishi... • Answered on May 02, 2015
0helpful
1answer

Mitsubishi Rear Projection TV Model WS-55311

Rear projection TVs are dinosaurs. Sell it if you can get anybody to buy it and get an HDtv they're pretty cheap now not to mention thinner, lighter and better for your eyes. Imagine the space you'll save if you mount it on the wall and the cost of electricity. Not trying to be a jerk but it's time to move into the 21st century. The picture is waaaaay better.
11/13/2014 2:00:11 PM • Mitsubishi... • Answered on Nov 13, 2014
0answers
0helpful
2answers

I have an mitsubishi medallion hd1080 big screen

Try to unplug set and try it again as if the set was unplugged and then the self check done it will be 1,2 which means NO ERROR detected.

Let me know also what the set does?


SD TECH
11/23/2013 12:49:43 AM • Mitsubishi... • Answered on Nov 23, 2013
0helpful
1answer

How to open front screen to clean it

take off speaker cover, you will see two clips with two screws in each. unscrew, then lift screen straight up. walaaaa
10/26/2013 2:04:01 AM • Mitsubishi... • Answered on Oct 26, 2013
0helpful
1answer

My panasonic cinemavision 1081 wont turn on the

Model number please? Also count the number of blinks: 3 or 5 or?SD TECH
7/25/2013 7:06:08 PM • Mitsubishi... • Answered on Jul 25, 2013
0helpful
1answer

Shadowing of picture

A shadowy or 3D image is caused by the convergence not being aligned. If your model has a convergence menu goto it and see if you can adjust the colors so that they are all straight and aligned. If so the 3d shadows will go away. If however it wont adjust the convergence has failed and would need to be to repair the TV yourself or with a company. Convergence repairs are common a fairly easy DIY fix.a391e14d-f2bf-4e87-a84b-1c5e70c6c8a6.jpg
5/25/2013 7:08:50 PM • Mitsubishi... • Answered on May 25, 2013
0answers

Error code 12

Be the first to answer 5/22/2013 1:25:03 AM • Mitsubishi... • Posted on May 22, 2013Be the first to answer
0answers
0helpful
1answer

The color is off specifically the blue. How do i get the color to line back up

b2bb99ed-cf10-4f7f-ba5f-fab850f33ec1.png What you describe is known as a convergence chip problem which is a fairly common occurance. You can read more about it here on this fixya tip page. http://www.fixya.com/support/r4581251-convergence_failure_test
4/30/2013 6:01:11 PM • Mitsubishi... • Answered on Apr 30, 2013
0helpful
1answer

Location of the dm module in my mitsubishi 60111 tv

Your model doesnt have a DM module like the later versions. You have the V20A chassis and that doesnt have a DM assembly.
4/4/2013 12:42:12 AM • Mitsubishi... • Answered on Apr 04, 2013
Not finding what you are looking for?
Mitsubishi WS-55819 55" Rear Projection Television Logo

258 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6409 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mitsubishi Televison & Video

  • Mitsubishi Televison & Video

Most Popular Question

mitsubishi medallion tv stays about 10

  • Televison & Video
Loading...