20 Most Recent Mitsubishi WD-52525 52" Rear Projection HDTV - Page 5 Questions & Answers


Mitsubishi... | Answered on Nov 17, 2013


Mitsubishi... | Answered on Nov 17, 2013

try pressing the small reset button on the TV the light should blink rapidly for about a minute and then stop if it does not stop you will need to have the TV repaired

Mitsubishi... | Answered on Nov 04, 2013

am sure the lamp is fine. first thing replace the lamp thermal sensor if this does not work check the lamp ballast (aka) lamp power supply.

Mitsubishi... | Answered on Oct 09, 2013

The WS is a picture tube type rear projection first produced as a 2003 model year set.

A few questions and then a offer if needed.

Did this happen suddenly or after a power loss?

By reboot do you mean the recessed reset button on the front of the set?

I will presume if you turn color off completely the screen is some other color than black and white?

the offer: have you tried the Option menu this set has hidden, I can explain if needed.

Mitsubishi... | Answered on Sep 02, 2013

replace the converge ic's

Mitsubishi... | Answered on Aug 17, 2013

try to reset press menu 123 enter if not sounds like a engine big bucks.

Mitsubishi... | Answered on Aug 02, 2013

you must test the power supply inside. See if the fan is working, and thermostat is ok. test it.
God bless you

Mitsubishi... | Answered on Aug 01, 2013

I have the exact same problem.
TV was working fine (if you call having to deal with blinking lights of death and multiple starrt up errors...) - but I powered through it all.
This TV is 6 years old and started acting up after the 4-year extended warranty ran out.
This morning I went to turn it on and nothing.
Hmmm... Got my manual to count the blinking light code...
Whoops. No lights. Nothing. Checked plug. Checked power.
Uninstalled and installed lamp. Checked plug and power again.
Not one stinking light. No power to fan. Nothing.

How does a TV just DIE???

Mitsubishi... | Answered on Jul 24, 2013

If you wish to get more details, check this site linked below. Pull up older posts there. Check the site with patience, as it has over 2400 posts now. All are related to electronic equipment repair help. If you search the site in Timeslide option, which can be selected from the drop down list at the top left of the display window, it will be easy to locate the related post. You can also do a search by type in the brand name to your device into its search box at the top right of display window. Your problem post haven't enough details to provide a solution.http://electronicshelponline.blogspot.com/

Mitsubishi... | Answered on May 02, 2013

there's a blue switch that needs to be actuated when you put the 2 lamp covers on.

Mitsubishi... | Answered on Apr 20, 2013

You're asking the way to access the ballast board, I assumes and posts this solution. You have to disassemble the set. If you wish to get more details, check this site. Pull up older posts there. Check the site with patience, as it has over 2250 posts now. All are related to electronic equipment repair help. Search the site by 'Timeslide' option. It will make search easy. Or, type in the brand name to your device into its search box, and press "Enter" Disassembley procedure is given in detail with illustrations. I can't include all that illustrations and descriptions here by this window.

Mitsubishi... | Answered on Apr 11, 2013

The lamp cover is not installed properly or the lamp door switch isnt working thats what causes the 32 error.

Mitsubishi... | Answered on Apr 08, 2013

The DM is the second board inside the Chassis block directly underneath the FMT board. But replacement DM boards if still good are very expensive your better off replacing the 4 capacitors that fail on the DM.

Mitsubishi... | Answered on Apr 04, 2013

Thats one of the famous capacitor issue most likely. Thats the V26 Chassis DLP and usually that symptom is caused by failed DM and Power Board capacitors. There is a repair kit that will work in alot of cases with that symptom. Its called The V26 Chassis DM / Power repair kit available at the following link with detailed instructions http://tvrepairworld.com/mitsubishi_repair_kits

Mitsubishi... | Answered on Apr 04, 2013

Its more likely that the front and rear mirrors need to be cleaned. The mirrors tend t get dull and that will cause the picture to become dull and the colors wont appear as vibrant as normal.

Mitsubishi... | Answered on Mar 27, 2013

Not finding what you are looking for?
Mitsubishi WD-52525 52" Rear Projection HDTV Logo

1,606 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

matt martin
matt martin

Level 3 Expert

1258 Answers

The Knight
The Knight

Level 3 Expert

76396 Answers


Level 3 Expert

13434 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

WD Mitsubishi

  • WD Mitsubishi

Most Popular Question

bulb goes out after few minutes

  • Televison & Video