Mitsubishi VS-5077/78 TV - Page 7 - Answered Questions & Fixed issues

https://www.manualslib.com/products/Mitsubishi-Ws-55411-281606.html

BLINKING

Yes, but if you leave it unplugged for at least 1/2 hour you should be safe. Use insulated tools or rubber gloves to be sure.

https : // www . manuaiscenter . com / manuals / mitsubishi / hsm1000g - servi?o - manual . html #. XH5euon7QdU Detalhes

It's been a lot of years since I worked on an HS-U65, but I'm pretty sure it only plays NTSC VHS Tapes.

Do you see a small fan close to it? Is it gunked up with dust? It could be the bulb but it sounds like it isn’t getting cooled.

Try here: https://www.directutor.com/remotes/Mitsubishi_290P122020_Remote_Manual_Codes?page=160

Probably the code is 000.

you need special pair of glass's that came with the TV to watch it in 3d

It is probably wired wrong, so the wires connecting the light to the house may need to be fixed.

I agree...thermo (heat) problem in power supply. Saw the same problem with Mitsubishi models many times.

by removing the screws on back and splitting apart the back from front

LCD's are bad, warranty won't fit just a few, only a lot, yours aren't enough for warranty, best get new tv, they are expensive to fix

Sounds like it's time for a new lamp.

Corel DVD MovieFactory 7 Launcher activetion code

You will have to scan tv on "air" and not cable in menu settings.

most of the old vcrs did not go past 2000 for the chip they were using would not go past that.

Yes but to a professional

Search for network navigator to use it