20 Most Recent Mitsubishi CS-26201 TV Questions & Answers

0helpful
1answer

Universal code for CS2610R

026,022,025,021. Try these codes. If you wish to get more details; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. Common codes used for devices too are given, in the order of device brand name list in alphabetical order. See it in "Mosaic" or "Magazine" view. It will make surf easier. Or, do a search by type in the brand name of your device at its search box, and press "Enter". http://remotesearch.blogspot.com/ http://electrohelponline.blogspot.com/
7/18/2014 6:41:27 AM • Mitsubishi... • Answered on Jul 18, 2014
0answers

Speakers off

Be the first to answer 5/26/2014 3:18:18 AM • Mitsubishi... • Posted on May 26, 2014Be the first to answer
0helpful
1answer

No picture or sound. Is this a tuner problem?

A no picture and no sound problem could not be a tuner problem. To test if it is a tuner problem, there must be a sound and picture using the rca input at the back of tv. I would suggest to resolder tuning section not the tuner itself. Thanks for using Fixya.
10/15/2013 2:28:19 AM • Mitsubishi... • Answered on Oct 15, 2013
0helpful
1answer

Tv lock because of parental code

You will need an original remote control, which you can order online. With the original remote, turn the TV on, point the remote at the TV and press the "QV" (quick view) and the "9" buttons at the same time.
8/28/2013 9:39:10 PM • Mitsubishi... • Answered on Aug 28, 2013
0helpful
1answer

My Mitsubishi CS-2610 S-Monitor suddenly blacked out! I am having a difficult time finding a job, and cannot replace my TV right away. Can it be fixed?

tried to re soldered first cold soldered component parts at the main board which may get loose contact. if can not get with re soldered check bulged or leak capacitor at the vertical section. and then try to observed if the vertical ic is too hot, that was mean the ic get bad.just replaced with new one and re check other component near the ic.
8/10/2012 2:53:35 AM • Mitsubishi... • Answered on Aug 10, 2012
0helpful
1answer

Mitsubishi cs-26201 with "speaker off" - how to

After a pulled plug got me Speaker off I was frustrated for weeks and found no solution online until I looked at a site offering original remotes and realizes I was using a VCR's remote for the TV. The Manual was long ago destroyed and is not available online that I can find, but I dug around for the oriignal remote and clicking the Audio button repeatedly brought up the Speaker: Off option and then it was just a press of Adjust to turn it back to On - problem solved. I don't know if there is a way to do it without the remote, but the only controls on the TV are those on the front and in addition to steps people online suggested I think I must have tried every combination possible of pressing those in sequence or together as well as everything I could think of on the other Mitsubishi remote and the Universal remote I had been using.
10/28/2011 6:55:09 AM • Mitsubishi... • Answered on Oct 28, 2011
0helpful
1answer

No volume

You need to get into the audio menu and turn the speaker on. Usually even without the remote the control the buttons on the set will allow this. Sometimes they are not marked but usually pushing two buttons at once, or holding one while pushing another will work. Experimentation should yield which ones work. Once you are in the menu it should be easy to get to the audio controls using the buttons on the front. Again experimentation and retrys may be required. When you find the correct menu toggle the speaker back on and you should be good. If you don't mind spending the money, and it may make your life easier down the road, this website http://www.remotes.com/ has your factory remote for $67.20 plus shipping. A cheaper alternative may be to buy a universal remote for 5 to 10 dollars but there is no garantee that it will allow you to access the menus. Good luck.
9/23/2011 4:02:46 AM • Mitsubishi... • Answered on Sep 23, 2011
0helpful
1answer

How do i remove parental

  • Using your remote press the number "9" and the "QV" buttons at the same time while on the code lock screen.
  • It's that simple.

  • Hope this helps and thank you for using FixYa.

Regards, Tony
7/31/2011 1:05:40 AM • Mitsubishi... • Answered on Jul 31, 2011
0helpful
1answer

I requested help yesterday withk

i hope LED blinks when it shuts down .... if yes then ......flyback transformer is weak ..... replace with same part number........GUARNTEE IT WORKS ........( REMEMBER equivalent flyback will not work..........) ..............................if LED is also off then all transisitors, diodes & ic's hav to be checked .... but flyback transformer replacing is a must...............vishnuswamy_10.jpg
7/29/2011 8:01:51 PM • Mitsubishi... • Answered on Jul 29, 2011
0helpful
2answers

Mitsubishi CS-26201; blue screen and

I think that the trouble of your tv is only a loosed solder or cold solder. Try to remove the back cover of your tv then observe the solder side of your pcb it is much better if you use a magnifying glass to identify the cold solder and try to resolder it but before doing this you should unplug the unit and wait for a minute to discharge the current that your tv stored, and also try to look if there is a bulge up in the top of the capacitor or not perfectly flat like the other capacitor but before removing this capacitor you should observe proper position because it has a polarity. Good day and best regards, feel free to send feed back.
7/28/2011 9:10:19 PM • Mitsubishi... • Answered on Jul 28, 2011
0helpful
1answer

My tv is shows a blue screen. My tv does not

To remove the lock on the Jensen simpy press and hold the Display Button on the remote for at least 3 seconds whilst pointing it at the TV.

The lock will be removed and the TV will resume normal operation.

Please do leave a vote for the solution. Thanks for using FixYa
1/23/2011 12:49:30 PM • Mitsubishi... • Answered on Jan 23, 2011
0helpful
1answer

The TV is a Mitsubishi CS-26201C to the extent it

The child managed to press the button on the remote that controls closed-captioning, and now the TV is set for "text" mode. I don't remember if the button says "caption" or "cc", but it's one of those or something very similar. Press the button again to go through the settings until you get back to "off" and the box will be gone.

What's happening is that in text mode, the TV blacks out the area where the text would go. If there isn't any, the result is that mysterious black square. It may not show up at all on some channels, or only during some programs. It depends on whether captioning is being broadcast. Since many TV remotes have a single button to control caption settings, it's easy to get into this mode without realizing it. But it's easy to fix.

Hope this helps! Thanks for using Fixya.
11/6/2010 9:29:55 PM • Mitsubishi... • Answered on Nov 06, 2010
0helpful
2answers

Mitsubishi CS-26201 remote is lost and sound

This is a very old tv. I would recommend replacing the remote if your looking to access advanced functions as its only a 15$ remote:
http://www.replacementremotes.com/MITSUBISHI-MGA/Buy-939P347B7-939P347070-TV-Remote-Control.html
Thank you,
Lee
8/3/2010 6:22:29 PM • Mitsubishi... • Answered on Aug 03, 2010
0helpful
4answers

No sound all audio and speakers on...

Hello,

The only thing you can press on your remote that will affect the sound is if you put it on mute or you reduce the volume to the lowest, besides that, the only problem to be suspected is the sound card in the television.

This will require you to open up the television and try to locate the wires that is connected to the speaker and where it is connecting from, to check for any fault.

I will suggest you connect your television to an external speaker by plugging in a speaker through the earphone plug in on the television.

You can as well connect the the television to your dvd player by connecting its audio out to your dvd's audio in, then you can connect your dvd to an amplifier and the sound would be of high quality.

Take care
7/10/2010 6:00:45 AM • Mitsubishi... • Answered on Jul 10, 2010
0helpful
1answer

Television is dead. won't turn on picture or

There is a fuse in tvs I've had to change one myself
10/16/2009 6:30:37 AM • Mitsubishi... • Answered on Oct 16, 2009
0helpful
1answer

Unplugged TV for 2 hours.

Hi

Thanks for using FixYa. Unfortunately there is no reset button for the TV, you can leave it unplugged for 4-24 hrs and see if it reset itself, if does not then the issue could be due to bad power cable or a power circuit board going bad. If you have electrical expertise and know how to solder/desolder then you can just open the back cover and check for a burned capacitor/cold solder joints, if not then it is recommended to contact a qualified repair technician as these units have high voltages even when switched off.

Please do accept the solution if the issue is resolved or else revert for further assistance.

Thanks
Rylee
8/10/2009 2:05:23 PM • Mitsubishi... • Answered on Aug 10, 2009
0helpful
1answer

I can't see the bottom line of my tv

chec for some leaky capacitor on the vertical section.
7/31/2009 3:04:24 AM • Mitsubishi... • Answered on Jul 31, 2009
Not finding what you are looking for?
Televison & Video Logo

51 questions posted

Ask a Question

Usually answered in minutes!

Top Mitsubishi Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76791 Answers

Ekse

Level 3 Expert

13435 Answers

Cindy Wells

Level 3 Expert

6369 Answers

Are you a Mitsubishi Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Mitsubishi Televison & Video

  • Mitsubishi Televison & Video

Most Popular Question

tv mitsubishi cs 26201c extent

  • Televison & Video
Loading...