20 Most Recent Zonet ZEW2508 80211g Wireless USB Adapter (830762003380) Questions & Answers

When Zonet was in business, they did provide technical support for their products through an online support website. However, since they're no longer operating, that site no longer exists. You'll now need to rely on other sources for drivers or your previous downloads and discs. You may find some useful information in an archive copy of their site here. Some readers have reported that Tenda, which is still in business, may have made much of the hardware for Zonet, meaning that the firmware and drivers available from that site may work for your Zonet hardware.

Click the link and download the file. unzip the file and run the setup. Download Zonet ZEW2508 Drivers for Windows

Hi Nicolas,Zonet is no longer in business but when they were, their website was www.zonenetusa.comHowever, since they're no longer operating, that site no longer exists. You'll now need to rely on other sources for drivers or your previous downloads and discs.Have you tried using the Windows Update to get the drivers?Hope this helps,Gary

Thank you for using FixYa
If you do not already have it then go to this web site for Ubuntu and load Ndiswrapper and follow the instructions.

https://help.ubuntu.com/community/WifiDocs/Driver/Ndiswrapper

I have ubuntu core and I recently bought a generic adaptor and plugged it in and it worked. I hope you have this success. Once you load it go into your control panel then system and look for "Windows Wireless Adaptor" tool and click on it.

I hope this was useful and please comment if this was helpful to you.

contact your service provider and tell them the issue

Here's the driver and utility, zipped in one file. After download you'll need to unzip it and then run the installation of the drivers.
http://www.zonetusa.com/file/product/d/ZEW2508.zip

If this was helpful and informative please vote with a Thumb Up. Thank you.

Back when P4 systems were common, the hard drive interfaces were quite marginal for video processing and techniques to force the capture to faster devices (like a RAM drive, or now SSD drive, or SCSI interface to high end striped drives) were used to smooth the video capture. I have had good luck with SATA3 interface SSD's for capturing video, but continue to use a drive other than the one I boot from so windows doesn't mess up the frame rate.

Normally 12v and less than 1A

First: GENERAL ROUTERS RESETING Second: http://www.fixya.com/support/r7900574-general_router_setup

POORLY supported routers made in China. STRONGLY recommend disposing of this device and obtaining one from a better vendor that supports it's products i.e.: Cisco, 3Com, etc...

Contact seller or company that makes it. May be a download item on maker's site.