20 Most Recent Epson Perfection v600 - Page 2 Questions & Answers

try here Welcome to Epson Support for the

Yes I think it is time for new scanner . Hope this helps

I am sure the original poster will have probably replaced the unit by now but I just had a similar problem with my Epson Perfection 2480 Photo scanner so I think it is still worth posting the solution in case other people hit this problem in the future. All I had to do was put the switch underneath the scanner to the "unlocked" position and then reboot the unit. Hey presto it burst back into life. It's annoying to see that the manual seems to suggest that the red light means the unit is "dead" !

Troubleshooting Paper Reversal in Printers: *Confirm that options related to paper handling are set correctly by checking for specific buttons or switches that relate to paper handling or reversing. *Ensure that paper is loaded properly to avoid feeding problems. *Remove any dust, particles, or paper remnants from the rollers, as they can impede paper flow. *If other measures fail, reset the printer to its initial settings to resolve potential software glitches.

If you take is apart you may find jammed gears or dry lubricant causing a 'paper jam', due to its age and storage.

Try a hard reset of the printer. Oddly, the 034019 is not an error code, I have reason to think. It is a contact number, I believe.

Follow the steps given below to reset Epson L382 printer. Step 1: Turn the printer off. Step 2: Press and hold the reset button which is on the back of the printer using a paper clip or tip of a pen. Step 3: Turn on the printer by holding the Power & reset button and continue to hold both the buttons. Step 4: Wait for 5 seconds and a warning sheet will print. Release the reset button. Step 5: After 5 seconds, another sheet will print which will show the IP address of the printer. hold the reset button which is on the back of the printer using a paper clip or tip of a pen. WHERE IS RESET BUTON? I CANT FIND IT.

I have the code on I dtf printer 43 H : Head Teperaturer

https://printcopy.info/?mod=erc&brand=Epson&model=WorkForce+WF-C5790&code=032051

The error code 000101 on an Epson Workforce Pro C5790 printer typically indicates a problem with the print head. Here are some steps you can try to troubleshoot and fix the issue:

1. Perform a print head cleaning: From the printer's control panel, navigate to the Maintenance menu and select the option to perform a print head cleaning. This will help to clear any clogged nozzles or debris that may be causing the error.
2. Perform a print head alignment: From the printer's control panel, navigate to the Maintenance menu and select the option to perform a print head alignment. This will help to ensure that the print head is properly aligned and is able to print correctly.
3. Check for any physical obstructions or debris in the print head area, if you find any, remove it carefully.
4. If the error persists after trying the above steps, you may need to replace the print head.
5. If none of the above steps work, it is possible that the printer has a more serious problem that requires professional service.

I recommend you to check the user manual or contact Epson technical support for further assistance and specific troubleshooting steps for your printer.

https://files.support.epson.com/pdf/art1430/art1430ug.pdf look under troubleshooting - could be a bit if paper stuck inside and hard to see

Ck out these sites.... https://www.google.com/search?q=How+can+I+force+print+with+low+ink+cartriage+warning+on+my+Epson+XP830 Best to you.

Try this program How to Reset Epson L382 Waste Ink Pad Counter using its Adjustment Program (freeprinterdriverdownload.org)