Top 20
Planar PDP-42BK 42 in. Plasma HDTV - Page 9 Questions & Answers
My portable onn dvd player volume keeps going down by itself.
Check if the volume knob on the DVD player is stuck or damaged. If it is, try cleaning it with a soft cloth and see if that helps.
If the volume knob is not the issue, try cleaning the laser lens inside the DVD player with a cotton swab and alcohol. This can help remove any dirt or dust that may be interfering with the player's operation.
If the above steps do not work, try resetting the device by holding down the power button for about 10 seconds. This action refreshes the system and closes all running processes, potentially resolving the glitch. If this does not work, I suspect you would have to have a repair shot take a look or consult customer service of the device.
My Polaroid tv the LED is permanently on but will not turn off with the remote.
Question edited for clarity.
The LED light is a standby light and is on all the time the set is powered on by its On switch.
All sets have Buttons on the set itself, they are either on the lower left or right edge, or the latest craze is to put them on an angled panel on the rear of the set.
If you have a smartphone, you can test the remote. Aim the front of the remote at the front facing selfie camera whilst in photo mode and press the On button on the remote. You should see a red flash on the phone screen.
Try a Power Reset. Remove the television wall plug for 5 minutes and then plug it back in.
..
My provide TV 3200 needs to be reset to work with my OTA indoor
If you're having trouble getting your OTA channels to work on your ProView 3200 flat screen TV, there are a few things you can try:
- Verify that the antenna is correctly and securely plugged in by checking it. Try raising your over-the-air antenna if you're using one, ideally so it's close to a window. To determine out which way your antenna should be pointed, you may also use an online station finder.
- Restart the TV: Press the power button to turn off your TV, then disconnect it from the mains, wait two minutes, plug it back in, and press the power button again to turn it on. Try launching an automated channel search on your TV after it has restarted.
- In the event that your TV is still unable to pick up channels, check the tuner and make sure the coaxial line is in working order.
I hope this helps you restore service to your OTA channels!
When I turn the tv on it remains black . No picture only sound.
Hello, this happens when the HDMI connection on either device has failed or the HDMI cable is bad. Can you still access the television menu with a button on the television or from its own remote? When this does not help and unplugging the television, for some time did not, then take a clear flashlight and shine its light everywhere on the screen. When the backlight is broken, you can still see what is on screen in that small lit spot. This is a common failure and can often be repaired. There are video's about it on YouTube. Capacitors for the power supply hold high voltage so unplug the set from the mains and wait a little before even opening. Still never touch those small towers. When their top, that looks like divided in three parts, isn't flat anymore then there is a power issue and those capacitors must then be replaced.
Not finding what you are looking for?