20 Most Recent
Dyson Inc Am05 Hot Cool Fan Heater - 300095-01 - Page 5 Questions & Answers
How can I find out the age of a used DV-35
Best to look on the company web site .There might be a date on the makes data badge .You will need to know the BTU'S it give out . To see if it would heat your room . You might be better off with the wood burner ,
2/20/2023 8:18:03 PM •
Heating &...
•
Answered
on Feb 20, 2023
Window mesh cover louvers 5000 BTU window mount
Sachez que le maillage des fen?tres est con?u pour emp?cher les insectes tels que les punaises puantes d'entrer dans la maison tout en permettant une circulation d'air ad?quate. Par cons?quent, le maillage ne devrait pas interf?rer avec le flux d'air ou endommager le compresseur de votre syst?me de climatisation.
Cependant, il est important de noter que les punaises puantes peuvent p?n?trer dans la maison par d'autres moyens, tels que les portes ou les fissures dans les murs ou les fen?tres. Pour emp?cher les punaises puantes d'entrer dans votre maison, vous pouvez prendre des mesures telles que :
R?parer les fissures dans les murs et les fen?tres.
Installer des barri?res physiques comme des rideaux de porte ou des filets anti-insectes pour emp?cher les punaises puantes d'entrer.
Nettoyer r?guli?rement votre maison pour ?liminer les sources de nourriture et d'eau qui attirent les punaises puantes.
Si vous trouvez des punaises puantes dans votre maison, vous pouvez les ramasser d?licatement avec un essuie-tout et les rel?cher ? l'ext?rieur loin de votre maison. Il est important de ne pas les ?craser car cela peut lib?rer leur odeur d?sagr?able.
Bonne chance
2/17/2023 9:04:41 PM •
Heating &...
•
Answered
on Feb 17, 2023
Cover louvers with mesh on Artic King 5000 ? Window mount
Je pense que le maillage des fen?tres, quel qu'il soit, ne devrait pas restreindre suffisamment le d?bit d'air pour endommager un compresseur. Parce que les mailles modernes sont con?ues pour permettre une circulation d'air ad?quate tout en emp?chant les insectes d'entrer dans la maison. Aussi les mailles ont des trous suffisamment petits pour emp?cher les punaises puantes et d'autres insectes d'entrer, En revanche ils sont suffisamment grands pour permettre une circulation ad?quate de l'air.
Veuillez donc v?rifier vos Filtres, car il est possible qu'ils soient sales ou obstru?s puissent restreindre le d?bit d'air dans les syst?mes de climatisation, ce qui peut causer des probl?mes de performance et d'efficacit?, mais cela est plus souvent caus? par un manque d'entretien ou des filtres de mauvaise qualit? plut?t que par le maillage des fen?tres.
Enfin, il est tr?s important de maintenir les filtres de votre syst?me de climatisation propres et en bon ?tat, et de remplacer les filtres sales ou obstru?s d?s que possible pour assurer une performance optimale du syst?me.
2/17/2023 8:52:28 PM •
Heating &...
•
Answered
on Feb 17, 2023
Covering louvers with mesh damage compresson
Oui, les punaises peuvent effectivement p?n?trer dans une maison par des persiennes ou d'autres ouvertures, car ces insectes peuvent se faufiler ? travers des espaces tr?s ?troits. Les mailles de fen?tre sont con?ues pour emp?cher les insectes tels que les moustiques, les mouches et les papillons de nuit de p?n?trer dans la maison, mais elles peuvent ne pas ?tre suffisantes pour emp?cher les punaises de le faire, car ces derni?res peuvent facilement se faufiler ? travers des mailles de petite taille.
En revanche, les mailles de fen?tre ne devraient pas interf?rer avec le flux d'air. Les mailles de fen?tre modernes sont con?ues pour permettre une circulation d'air ad?quate tout en emp?chant les insectes d'entrer dans la maison. Si vous avez des probl?mes de circulation d'air, il est possible que d'autres facteurs, tels que l'isolation ou les syst?mes de ventilation, soient en cause et devraient ?tre recherch?es.
2/17/2023 8:38:37 PM •
Heating &...
•
Answered
on Feb 17, 2023
My Rudd heat pump blew both 30 amp fuses so I turned power off replaced both fuses turned the thermostat to off turned power back on and the condenser fan came on at about half speed what's wrong
- Faulty fan motor: If the fan motor is not operating properly, it could be causing the fan to run at a slower speed than normal. Check the fan motor for any signs of damage or wear, and consider replacing it if necessary.
- Capacitor issues: The capacitor is a component that helps to start the fan motor and keep it running. If the capacitor is faulty or damaged, it can cause the fan to run at a slower speed. Check the capacitor for any signs of damage or wear, and consider replacing it if necessary.
- Low voltage: If the voltage to the unit is low, it can cause the fan to run at a slower speed. Check the voltage to the unit and ensure that it is within the correct range.
- Electrical issues: There may be other electrical issues within the unit that are causing the fan to run at a slower speed. Check the wiring and connections for any signs of damage or wear, and ensure that all connections are secure.
It's important to address these issues promptly to prevent further damage to the heat pump or other components.
2/17/2023 2:51:25 AM •
Heating &...
•
Answered
on Feb 17, 2023
Wobbles......5 ceiling fans
Several things can cause a ceiling fan to wobble. The most of common of which is loose screws in the fan blade irons , that attach to the fan's motor. Just one loose screw can cause significant wobble and at times, an annoying noise. The other, which is more serious, is that the plastic ball on the top end of the down rod, that attaches to the electrical outlet bracket, is improperly installed. It generally has a groove in it, that must be installed so that it fits over the tang in the bracket. The tang keeps the ball in place. To inspect it, you will need to loosen the screw on the ceiling cowl, so that it slides down the down rod. If the ball is not resting in the bracket properly, lift the fan up by the down rod and put the plastic ball in the proper position. Be sure the wall switch for each fan you work on is turned OFF, before attempting in inspection or repair.
While you're at it, make sure the ceiling/electrical box bracket is tight to the the ceiling and is level,
Hope this helped you troubleshoot and solve the wobbly problem. Please let me know. Thanks.
2/16/2023 5:08:31 PM •
Heating &...
•
Answered
on Feb 16, 2023
My food saver VS6621 doae not seal anymore.
Based on the information provided, it sounds like there may be an issue with the heating element of your FoodSaver VS6621, which is preventing it from sealing properly. Here are a few things you can try to fix the problem:
- Clean the sealing strip: Over time, the sealing strip on your FoodSaver can become dirty or worn, which can prevent it from creating a proper seal. Try cleaning the sealing strip with a damp cloth to remove any dirt or debris.
- Check the heating element: As you mentioned, the resistance of the heat wire was zero, which may indicate that the heating element has failed. If this is the case, you may need to replace the heating element. Check the manufacturer's website or manual for instructions on how to do this.
- Check the vacuum channel: If the vacuum channel is clogged or dirty, this can also prevent the FoodSaver from sealing properly. Try cleaning the vacuum channel with a damp cloth and ensuring that it is clear of any obstructions.
If none of these solutions work, it may be best to contact the manufacturer or a professional repair service for further assistance.
2/15/2023 5:59:28 AM •
Heating &...
•
Answered
on Feb 15, 2023
Model CZQTV008EBK unit won't run fan or heat. Power light is on, but when turned on, nothing comes out. What do I do?
If the power light is on, then the unit is receiving power. The first thing to do is to check the thermostat settings and make sure they are set correctly. If the thermostat settings are correct, then you may need to check the fan motor and heating element for any signs of damage or wear. If there is damage or wear, then you may need to replace the fan motor or heating element. If there is no visible damage, then you may need to contact a qualified technician for further diagnosis and repair.
2/14/2023 12:19:12 AM •
Heating &...
•
Answered
on Feb 14, 2023
Hallo I have model 630 Eurosit heater i turn it full on but after few minutes it turn slow slowly and then finally it turns off plz give me some solution thanks
There could be a few different reasons why your heater is turning off. Here are a few things you can try to troubleshoot the problem:
- Check the thermostat: Make sure the thermostat is set to the desired temperature. If the room temperature reaches the set temperature, the heater will turn off.
- Clean the heater: Dust or other debris can accumulate in the heater, reducing its efficiency and causing it to turn off. Clean the heater according to the manufacturer's instructions.
- Check the ventilation: If the heater is not getting enough air, it can turn off. Make sure that there is no furniture blocking the air vents and that the air filter is clean.
- Check the electrical supply: Make sure the heater is properly plugged in and that the circuit breaker has not tripped.
- Contact a professional: If the above steps do not resolve the issue, it may be a problem with the heating element or the thermostat. In this case, it is best to contact a professional to diagnose and repair the problem.
Note: Before attempting any repairs, make sure to disconnect the power to the heater and follow all safety precautions.
2/13/2023 3:08:10 PM •
Heating &...
•
Answered
on Feb 13, 2023
Not finding what you are looking for?
