20 Most Recent Dyson Inc Am05 Hot Cool Fan Heater - 300095-01 Questions & Answers

0helpful
2answers

What does error code e7 on a Dyson am 05 mean?

Hi there, it's Jack at Dyson. If your Dyson Hot + Cool heater is displaying an E7 error code, we will need to take some further details via our Helpline to resolve this for you. When you have your machine to hand, please call us on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU) so we can provide assistance. We'll look forward to speaking with you.
3/13/2015 3:16:43 PM • Dyson Inc Am05... • Answered on Mar 13, 2015
0helpful
2answers

How many square feet will it heat

Hi there, it's Jack at Dyson. The Dyson AM05 Hot + Cool heater is suitable for small, medium and large rooms of up to 30 square feet. Dyson Air Multiplier technology draws in and amplifies ambient air to projects the heat further, warming the whole room quickly and evenly. And in the summer, it cools you with uninterrupted high velocity airflow. I hope this answers your question, but if you'd like further information please visit http://www.dyson.com or give our experts a call on 0800 298 0298 (UK), 1-866-693-9766 (US), 1-877-397-6622 (CA) or 1800 239 766 (AU).
2/18/2015 2:09:13 PM • Dyson Inc Am05... • Answered on Feb 18, 2015
0helpful
1answer

Hi. I have a Dyson AM05 fan heater purchased July 2014. Whilst the cold air works brilliantly the hot air doesn't work at all. It shows an error message E8. Any advice?

I suspect that the microprocessor detected an overheat fault and is keeping it in E8 mode to prevent fire. The code needs to be cleared somehow. If it has some buttons on the front then try holding one whilst plugging it in. This may reset it. The reset will be something along those lines. Don't open it because if you can't fix it that way you need to take it back to the shop.
12/29/2014 4:29:10 PM • Dyson Inc Am05... • Answered on Dec 29, 2014
0helpful
1answer

Hot-cool ha

Hi there, it's Jack at Dyson. If you've returned your AM04 or AM05 heater to us for the engineering fix following the recent voluntary recall, we'll have it back with you as soon as we're able to. Our aim is to retrieve, fix, clean and return all affected heaters as quickly and painlessly as possible - this is free for all affected Dyson owners. If you'd like to get in touch to discuss your concerns, please visit http://www.dysonrecall.com
9/29/2014 2:34:48 PM • Dyson Inc Am05... • Answered on Sep 29, 2014
0helpful
1answer

Can I get Money back on dyson recall heater

Hi there, it's Jack at Dyson. Our aim throughout the recent voluntary recall has been to retrieve, fix, clean and return all affected AM04 and AM05 heaters. This is free of charge to affected Dyson owners. Our engineers have developed a fix, and we're also reissuing the 2-year warranty as a mark of our confidence in our technology. If you have additional concerns you're welcome to get in touch: http://www.dysonrecall.com
9/29/2014 2:32:07 PM • Dyson Inc Am05... • Answered on Sep 29, 2014
0helpful
1answer

Pilot on my Procom lites up well but the dies out??

The thermocouple may need to be cleaned or replaced in order for the pilot to stay lit. look for a small round post directly in line with the flame.
2/2/2023 4:37:48 PM • Heating &... • Answered 1 hour ago
0helpful
1answer

Heather replace model #zhs-36-b

No promises. You can try contacting EASY TOP (HK) ENTERPRISES LIMITED 524 South Main St, Joplin, MO 64801 TOLL FREE: 1-866-949-3838 EMAIL: [email protected] Here is a troubleshooting page: https://fireplacehubs.com/febo-flame-electric-fireplace-troubleshooting/ Maybe these people could help or offer an alternative: https://www.electricfireplacesdirect.com I'm not providing a contact number for Febo International because I have found posting suggesting it is out of business, the phone is disconnected, and finally, two guys in California may be the only people you get ahold of. I have not confirmed any of that but it is off putting. It is barely possible you could find the "A" model of this rather than your "B" on ebay. That said, the Joplin, Missoiri outfit has been a distributor for the product, I think. Good luck.
2/2/2023 12:14:58 AM • Heating &... • Answered 18 hours ago
0helpful
2answers

Gas furnace using a 50A50-474 control unit. The motors start, gas starts running, but the multimeter shows no voltage going to the igniter when the gas is flowing.

Hi, Please use a air quality meter when dealing with this as you want to protect yourself against accidental gas leaks. I would advise setting up an appointment with an HVAC specialist to update your furnace because one slight mistake with replacing parts in your furnace might lead to disaster. Thank you.
2/1/2023 9:40:49 PM • Heating &... • Answered 20 hours ago
0helpful
2answers

Pilot light on my portable propane heater won't stay on and that kills the heater. Strangely we use it in a Sunroom, in the North East. Wht's the problem??

Dirty either inside or accumulated soot. Posible not in correct position, it needs to be within flame reach
2/1/2023 2:00:39 AM • Heating &... • Answered Yesterday
0helpful
3answers

How to change bulb in amish heat surge heater

It's not difficult to change the bulb. But lengthy to explain. If you no longer have your Owners Manual go the link below and click on "Flame does not illuminate properly" More than likely though, the bulb(s) have just come loose.

http://www.heatsurge.com/help/troubleshooting.cfm
1/31/2023 4:17:59 PM • Heating &... • Answered 2 days ago
0helpful
1answer

Why does my glo warm lp heaters pilot seem to have to much pressure to light

no info generic answer regulator out of adjustment -failing ---orifice failing ---valve failing
1/31/2023 4:13:43 PM • Heating &... • Answered 2 days ago
0helpful
1answer
0helpful
1answer

All pro SPC 150T propane heater. starts and runs great for 10 minutes and then shuts heat down and blows only cold air. let sit for time and it repeats process.

It is possible that the problem with your All Pro SPC 150T propane heater could be caused by a faulty gas regulator or pressure switch. The gas regulator controls the flow of propane while the pressure switch controls the temperature of the heater. You may need to replace the gas regulator or pressure switch in order to get your heater running again. Additionally, you could also check for any loose connections or clogs in the fuel line.
1/30/2023 3:08:59 AM • Heating &... • Answered 3 days ago
0helpful
1answer

My valour fireplace electrical box is making a buzzing noise. As the remote won't start the fireplace, it's probably a short circuit. Anyone else have this problem?

It is possible that your Valour fireplace electrical box is making a buzzing noise due to a short circuit. You should contact a qualified technician to inspect the unit and determine the cause of the issue. It is also possible that the remote is not working due to a faulty connection or a dead battery.
1/29/2023 6:52:58 AM • Heating &... • Answered on Jan 29, 2023
0helpful
1answer

630 Eurosit 0630545 ventless fireplace

It is possible that your 630 Eurosit 0630545 needs a deep cleaning or a replacement part. The loud poof sound could be caused by a buildup of dirt and debris in the burner or a faulty part. You should contact a qualified technician to inspect the unit and determine the cause of the issue.
1/29/2023 6:51:31 AM • Heating &... • Answered on Jan 29, 2023
Not finding what you are looking for?
Dyson Inc Am05 Hot Cool Fan Heater - 300095-01 Logo

Popular Tags

5 questions posted

Ask a Question

Usually answered in minutes!

Top Dyson Heating & Cooling Experts

Paul Carew

Level 3 Expert

3746 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

john h

Level 3 Expert

28507 Answers

Are you a Dyson Heating and Cooling Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Dyson Heating & Cooling

  • Dyson Heating & Cooling

Most Popular Question

many square feet will heat

  • Heating & Cooling
Loading...