20 Most Recent Sampo PME-42V3 42 in. Plasma Television - Page 9 Questions & Answers

0helpful
1answer

Sparks like 4th of july

yes of course.
10/25/2022 6:33:45 PM • Televison &... • Answered on Oct 25, 2022
0helpful
1answer

Hi, my ecco smart tv is stuck on av and the red led keeps flashing nothing works on the remote.... pls help

Hi, Please power cycle your tv. You can also remove and re-add your remote batteries. If this continues after the restart, then please remove any extra connection from the tv and check again. If there is still an issue, then please consider performing a factory reset on the tv. Thank you.
10/25/2022 6:33:41 PM • Televison &... • Answered on Oct 25, 2022
0helpful
1answer

Where is the bluetooth in pensonic android tv

You go to the settings and find the blue tooth setting or the network icon on the TV. Select 'Bluetooth devices' or 'Devices and press OK to search for the Bluetooth device within range
10/24/2022 1:00:43 PM • Televison &... • Answered on Oct 24, 2022
0helpful
1answer

How do i program my greenbrier 6 in 1 remote to control the tv

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
10/24/2022 5:20:02 AM • Televison &... • Answered on Oct 24, 2022
0helpful
1answer

Something wrong with hdm1

The camera doesn’t work with the input on HDMI.
10/24/2022 3:30:41 AM • Televison &... • Answered on Oct 24, 2022
0helpful
1answer

Hilti DD 30-W Core drill spare part list

Wow, you are right. This is the first time I have not been able to find parts for a drill! Contact Hilti direct from the website. My guess is that only service centres can get parts for this one. https://www.google.com/search?q=hilti+dd+30-w+%22parts%22 ..
10/23/2022 11:05:50 PM • Televison &... • Answered on Oct 23, 2022
0helpful
1answer

How do you reset or resolve a power supply fault alarm on the panel?

Here is the link.
10/23/2022 10:56:59 PM • Televison &... • Answered on Oct 23, 2022
0helpful
1answer

My shark vacuum duo is 3 years old. It's started making a loud lawnmower like noise when it goes on carpet. On hard floors its fine. Lying down, the noise is coming from the roller brush area.

The roller brush may be warped or unbalanced. It can happen after an accident of some kind. Maybe a large object too big to fit inside or crashing into a furniture leg. I don’t think cleaning the roller brush will help. Try it anyway. The bearings on each end of the roller brush could be going out or in need of a good cleaning. The belt hardly ever has any issues. It won’t break or come loose.
10/23/2022 7:25:51 PM • Televison &... • Answered on Oct 23, 2022
0helpful
1answer
0helpful
1answer

OFF ON VOLUME ? CHANNELS ?

Yes they all have that feature on the Remote and on the bottom or rear of the set. https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote ..
10/22/2022 9:18:02 PM • Televison &... • Answered on Oct 22, 2022
0helpful
1answer

Can not disable echo dot speak when controlling my fire stick connected to tv.

Install Fire Stick with TV UNPLUGGED
10/22/2022 3:27:19 PM • Televison &... • Answered on Oct 22, 2022
0helpful
2answers

My assist bike stays green

replace battery
10/22/2022 2:12:53 PM • Televison &... • Answered on Oct 22, 2022
0answers
0helpful
2answers

How to connect black wire hot lead to the circuit board?

Hi, if you want to connect a wire to a circuit board, you'd need to use a soldering iron to attach the wire to the board. Please research using that soldering iron online before proceeding. Thank you.
10/22/2022 1:50:24 AM • Televison &... • Answered on Oct 22, 2022
0helpful
1answer

Help Troubleshooting TCL R635 6 Series That Stopped Working

Hello, the noise was an LED exploding in the screen taking out the back lights (unfortunately a very common issue) and then the set won't power up. Replacing the is very difficult on that large of a screen without breaking it. Thanks Techman 57
10/21/2022 5:25:53 AM • Televison &... • Answered on Oct 21, 2022
0helpful
2answers

Lamona 1801 hop 4F's flashing and a nonstop beeping I have turned all the power of but it's still beeping

Hi, Please spread ice cubes across your heating pad in order to help cool it off if it's hot. If this does not work after 15 minutes of cooling, please call the manufacturer at 0344 460 0006. Thank you.
10/20/2022 11:50:08 PM • Televison &... • Answered on Oct 20, 2022
0helpful
2answers

WW Digital Scale no longer blinks 0.0 to begin weighing process

Hi, The 888 symbol just means that the WW scale is loading information. If the appears and then 0.0 disappears after that, then you might run a factory reset on the scale once in order to return it to it's default methods of operation (ie showing 0.0 on standby). Thank you.
10/20/2022 5:50:35 PM • Televison &... • Answered on Oct 20, 2022
Not finding what you are looking for?
Sampo PME-42V3 42 in. Plasma Television Logo

32 questions posted

Ask a Question

Usually answered in minutes!

Top Sampo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Marvin
Marvin

Level 3 Expert

85240 Answers

Are you a Sampo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sampo Televison & Video

  • Sampo Televison & Video

Most Popular Question

need universal remote control code

  • Televison & Video
Loading...