20 Most Recent Sampo PME-42S6 42 in. HD-Ready Plasma Television - Page 8 Questions & Answers

0helpful
3answers

Samsung led tv displaying a yellow triangle with

Have you tried unplugging the TV from the mains for a few minutes then plugging back in to see if it resets?
11/20/2022 10:30:25 PM • Televison &... • Answered on Nov 20, 2022
0helpful
1answer

Clear Tech TV doesn't show any picture?

See if there is someone in prison with you that has television tech experience? Try a reset. https://www.google.com/search?q=Clear+Tech+TV+reset https://www.fixya.com/support/r29790007-repairing_own_television ..
11/20/2022 10:25:25 PM • Televison &... • Answered on Nov 20, 2022
0helpful
3answers

How do I change the

GOOD DAY, CARL;

To change inputs on the TV, 90% of the time, it is done on the TV's remote control. Look for a marked button; 'video' or input. Press button to desired input. Other TV's have device/input buttons and will display on the TV's screen, scroll up or down, using the arrow buttons, once on desired input press the 'enter button.
GOOD LUCK, big IRISH. Come back with model number and I can be more particular, or e-mail me at [email protected].
Good Luck again.
11/20/2022 9:55:31 AM • Televison &... • Answered on Nov 20, 2022
0helpful
2answers

Problems with mitsubishi 1080p big screen 7302n60

Perhaps if you'd actually told us what those problens were, then the community could help.
11/20/2022 5:04:49 AM • Televison &... • Answered on Nov 20, 2022
0helpful
2answers

I have a gateway lp2407 monitor and can not get a

There are two places to look for the problems, the backlight inverter board and the power supply. Look at the power supply first since it is easier to get to, look for burnt parts, bad capacitors, etc.
http://en.wikipedia.org/wiki/Capacitor_plague
Please post back what you find.
11/19/2022 11:40:07 PM • Televison &... • Answered on Nov 19, 2022
0helpful
2answers

CODIGO DE TELEVISOR telstar modelo TTV2995PA PARA CONTROL REMOTO UNIVERSAL

Como busco los codigo del control remoto de mi tv telstar
11/19/2022 4:33:53 PM • Televison &... • Answered on Nov 19, 2022
0helpful
2answers

My Mastertech 40" smart television is coming on and Android is on the screen. Nothing else is happening. How to fix please?

Hi, Please power cycle the tv to start. If still having issues, then you can remove any accessories attached to the tv and power cycle once more. Otherwise, you might need to update the tv firmware or factory reset if the firmware update does not work. Thank you.
11/19/2022 4:33:48 PM • Televison &... • Answered on Nov 19, 2022
0helpful
1answer

No pictures or sounds what should I do

The on/off button is probably faulty! Replace the button.
11/19/2022 4:33:34 PM • Televison &... • Answered on Nov 19, 2022
0helpful
1answer
0helpful
1answer
0helpful
1answer

Disc keeps sticking as if it was dirty, which it isn't. Can this be the fault of the player?

A bit more information please. By "sticking" do you mean it isn't turning properly inside the machine or do you mean it isn't playing on the screen properly? Is this happening on one specific disc or all the ones you have tried? If more than one disc does this it is the player. If only one disc does it then it's that disc. Even the smallest scratch in the wrong place on a disc can cause 'Skipping'. On rare occasions discs can warp out of shape if it has been near heat for a good length of time. Did you just clean the disc (both sides), just the player or both? When using a Player Lens Cleaner I usually do it twice just to make sure it's clean.
11/17/2022 12:42:04 PM • Televison &... • Answered on Nov 17, 2022
0helpful
2answers

Is there a way to enable the backlight to turn on each time a button is pressed on the ur5u-8780l remote and the rc122 remote.

Hi, if you don't see any button with bulb icons on the remotes, then I would use the table of contents of each remote manual in order to attempt to get the backlight activated when click the remote buttons. Thank you.
11/17/2022 4:19:07 AM • Televison &... • Answered on Nov 17, 2022
0helpful
2answers

I have a 29 inch

good day,

the burnt smell means that there are some loose connection inside your unit. have it checked immediately by a competent technician. you can also use your warranty card if it is still valid
11/17/2022 2:45:37 AM • Televison &... • Answered on Nov 17, 2022
0helpful
1answer

Moen Chateau trying to replace cartridge Phillips screw that holds parts to cartridge just turns, Stripped? how do I get that our

Are you sure it isn't an Allen Screw, faucett screws normally are. 96804 looks to be a Phillips Screw. 94770 is an Allen Screw. The Phillips would be a candidate for drilling out if the drill will bite. Often it is less of a headache just to buy new. That is what we did, and our plumber is an honest guy, the screw wouldn't budge, rusted in. https://assets.moen.com/shared/docs/exploded-parts-views/l4635pt.pdf ..
11/16/2022 11:15:03 PM • Televison &... • Answered on Nov 16, 2022
0helpful
2answers
0helpful
2answers

I have a Normende Nd50ks4100s uhd 50 inch smart TV. Neither remote or rear buttons work, and comes up 'keyboard blocked'.

Hi, Please start by power cycling your tv and checking whether the tv buttons work afterwards. If not, the you would need to factory reset the tv prior to having normal access to it again. Thank you.
11/16/2022 1:11:06 AM • Televison &... • Answered on Nov 16, 2022
Not finding what you are looking for?
Sampo PME-42S6 42 in. HD-Ready Plasma Television Logo

58 questions posted

Ask a Question

Usually answered in minutes!

Top Sampo Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Jaime Hernandez

Level 3 Expert

2351 Answers

Marvin
Marvin

Level 3 Expert

85241 Answers

Are you a Sampo Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sampo Televison & Video

  • Sampo Televison & Video

Most Popular Question

experts r ni recently came into

  • Televison & Video
Loading...