20 Most Recent Star Micronics TSP600 Thermal Printer Questions & Answers

0helpful
1answer

My Star TSP600 Thermal Printer is displaying a flashing Error light. Power light on, new roll of paper loaded correctly, self-test was ineffective - nothing printed. What's my next step?

i know you stated you put the paper in correctlyin the printer but if the thermal reactive side of the paper is not facing the print head the thermal paper won't print on the wrong side of the paper. it will load into the printer and seem ok but the heat on the wrong side of the paper will not react and show any writing. Can you try turning the paper over in the printer feed holder so the other side of the paper faces the print head and give it another test .
6/22/2016 4:01:40 AM • Star Micronics... • Answered on Jun 22, 2016
0helpful
1answer

I replaced a tsp600 with a new tsp600

There are DIP switch settings in the printer, Check the old one and change the new on to match.
2/23/2014 12:42:46 AM • Star Micronics... • Answered on Feb 23, 2014
0answers
0answers
0helpful
1answer

I have a Star TSP600 Thermal Printer which is displaying a red error light.

Are you sure the paper is correctly routed? It will pass a detector. Mis-aligned paper, or defective/damaged detector will present the error.
11/8/2013 11:12:40 PM • Star Micronics... • Answered on Nov 08, 2013
0helpful
1answer

He printer goes to print but the page comes out

Hi

Please load the paper correctly with the side that can be scored by your finger nail pointing downwards.

Contact [email protected] for further help.

Star Support
8/25/2011 3:25:52 PM • Star Micronics... • Answered on Aug 25, 2011
0answers
0answers
0helpful
1answer

How do you refill one

A thermal printer needs no ink.

The ink is in the special paper.

See Wikipedia for the workings of a Thermal printer.

Take care!
damnor01
5/28/2011 8:49:18 PM • Star Micronics... • Answered on May 28, 2011
0helpful
1answer

I cannot download the driver

http://www.starmicronics.com/supports/starlegacydrivers.aspx#TSP600

Download the raster driver from the link below. If you need more help go to starmicronics.com and contact tech support
2/23/2011 4:30:33 PM • Star Micronics... • Answered on Feb 23, 2011
0helpful
1answer

My tsp600 receipt printer will

Dear Oasis Pools,

Please advise if the error light is flashing or solid. Also, perform a self test by turning the printer OFF, hold the feed button down, then turn the printer ON at the same time. A self test should print out. Did this print?

Regards,

Star Customer Support

For further assistance, please contact our Support Team at 800-782-7636 Option 2 for Tech Support or [email protected]
2/16/2011 4:13:43 PM • Star Micronics... • Answered on Feb 16, 2011
Not finding what you are looking for?
Star Micronics TSP600 Thermal Printer Logo

65 questions posted

Ask a Question

Usually answered in minutes!

Top Star Micronics Office Equipment & Supplies Experts

Cindy Wells

Level 3 Expert

6555 Answers

David Shaub

Level 3 Expert

2994 Answers

Brad Brown

Level 3 Expert

19163 Answers

Are you a Star Micronics Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Star Micronics Office Equipment & Supplies

  • Star Micronics Office Equipment & Supplies

Most Popular Question

star tsp600 thermal printer displaying

  • Office Equipment & Supplies
Loading...