SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready Plasma Television - Answered Questions & Fixed issues

0helpful
1answer

SVA TV will not turn on.

I've got old sva tv I was watching tv n went off then didnt com on any suggestions plz
1/5/2018 5:30:34 PM • SVA-USA... • Answered on Jan 05, 2018 • 592 views
0helpful
1answer

Why are there red lines in the middle of the screen?

If you wish to get some details; visit the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.
6/19/2015 3:42:45 AM • SVA-USA... • Answered on Jun 19, 2015 • 51 views
0helpful
1answer

I HAVE A HD4208T3-PDP WITH NO REMOTE

http://www.ebay.com/itm/Replacement-Remote-for-SVA-PDP4208-HD4208TII-HD4208UII-HD4208TIII-/111089776871
3/23/2015 7:56:02 PM • SVA-USA... • Answered on Mar 23, 2015 • 141 views
0helpful
1answer

Need power suply

just under $400 @ www.SVA-USA.Com
12/21/2014 10:04:57 AM • SVA-USA... • Answered on Dec 21, 2014 • 163 views
0helpful
1answer

VR3718W set shuts off and comes back on by its self. does this several times

Two most likely areas are power supply (filter caps?) or the main board which controls almost everything---a bit like saying my car stalls---things have to be checked out.
8/30/2012 2:12:41 PM • SVA-USA... • Answered on Aug 30, 2012 • 26 views
0helpful
3answers

I cant get the tv on...a red light comes on but it

The TV may simply be stuck in standby, the remote control will be required to get it started if there are no front panel controls. If there are front panel controls then the panel lock may be on. The remote is needed.
4/30/2012 11:13:55 PM • SVA-USA... • Answered on Apr 30, 2012 • 991 views
0helpful
1answer

MY HD4208TIII=PDP IS STUCK ON STANDBY MODE. hOW DO I GET IT TO TURN ON?

HelloPlug it out from AC mains, and let it be in that state overnight, and then check. OK.
11/10/2011 7:13:45 PM • SVA-USA... • Answered on Nov 10, 2011 • 310 views
0helpful
1answer

When plugged in, TV goes on and then goes off

This has nothing to do with the power cord, the fault is internal.
This is what happens: a part inside your tv has failed; when the tv is started the first thing that gets powered is the power source; when it reaches working order it starts to deliver the power to the other components, including the failed one; that failed one now acts as a short so the current thru it gets much larger than it should; this huge increase in current is detected by the safety system of the power source which gets triggered in emergency mode and shuts down the power source by force.
Normally the tv's processor would be powered long enough to detect itself the damaged part and generate a fault code - the status light should blink. If this doesn't happens it means that the fault is massive and affects directly the power source. Because of that the tv must be opened and tested, starting with the power source. The first step is something that you could do yourself, just follow this
http://www.youtube.com/watch?v=YCSNWi3UHf4
If, after that, you are still in the same situation, it's clear that another components were also damaged. From now on only an experienced repairman can do the diagnose, you will have to call one.
5/29/2011 4:00:13 PM • SVA-USA... • Answered on May 29, 2011 • 39 views
0helpful
1answer

I weeould like this manuel

Most major manufacturers supply manuals online so if you were to log on to the manufacturer's web site, you may be pleasantly surprised as usually, if available, one is able to download, by model number, Customer Instruction Manuals, Dealer Network for spare part supplies as required.

The information is normally free of charge.

I hope this helps.

4/21/2011 9:15:25 PM • SVA-USA... • Answered on Apr 21, 2011 • 87 views
0helpful
1answer

Humming noise and pixelation

the problem on ur unit is the y-sud board , u need to replace this board to fix ur problem
12/7/2010 11:03:16 PM • SVA-USA... • Answered on Dec 07, 2010 • 29 views
0helpful
1answer

I am having the problem where the red standby

Sounds like a faulty power supply, most probably caused by a power surge or the likes.
10/7/2010 9:00:39 AM • SVA-USA... • Answered on Oct 07, 2010 • 224 views
0helpful
1answer

When I plug it in

This happens because the power source has failed. What has caused the failure can be found only by testing it - but my guess, based on how it behaves, is that the high tension for the panel is faulty: the filtering capacitors have failed and fried the rectifier.
8/20/2010 2:52:42 PM • SVA-USA... • Answered on Aug 20, 2010 • 68 views
0helpful
1answer

When you turn the tv on it will turn off

It's in fault protection mode. Relay clicks then Clicks right back off to protect other components from getting damaged. If you are no longer under warranty DIY. Opening the set will void any warranty you may have. The UF capacitors on the PSB are blown. Recaping, a soldering iron and some solder is all you need. Under 20 bucks.
6/30/2010 6:22:14 AM • SVA-USA... • Answered on Jun 30, 2010 • 118 views
0helpful
1answer

When i hook up my game system to play in hd it doesnt work

i think your video output on the game is too high.
bring it back to 720 lines instead of 1080
4/7/2010 8:40:07 AM • SVA-USA... • Answered on Apr 07, 2010 • 71 views
0helpful
1answer

Crackling noise after being on for a short time

Looks like sound IC problem
4/7/2010 7:01:15 AM • SVA-USA... • Answered on Apr 07, 2010 • 68 views
0helpful
1answer

When I plug it in the red remote stand-by light

flashing power light:

projection TV`s have many protective circuits in them, they protect your CRT`s from damage, over voltage called x-ray, and many others, you need to have it checked before the damage is more costly, your TV is not happy and needs to be checked
1/31/2010 8:25:05 AM • SVA-USA... • Answered on Jan 31, 2010 • 254 views
0helpful
7answers

SVA PLASMA TV

I got this same tv from a guy in my area he would press the poewer botton on the tv and the standby light comes on and then turns off, so he gave me the tv for free i took the back panel off, and everytime i press the power botton the green light came on where the screen board is and went back off after i let the botton go i took the power board out took it to a repair shop to see if there was anything a wrong with it everything was good so i replaced the two fuses on the board and the one on the screen board, i had a feeling about the power switch so i jumped the wires on the switch purple to purple and green to green, I put it back together pluged it in the standby light came and stays on now, so i went out and got a universal remote for the sva at walmart for $15 programed it and pressto the tv works perfect so three fuses $3.60 two small pieces of wire and ele tape $0 my time 35 mins = one working plasma for $3.60 so when you have this problem like everyone else check the power botton switch, there cheap and check the fuses theres only three and if that dont work idk what to tell ya. and you do need a remote or tv wont work.
12/23/2015 7:06:44 AM • SVA-USA... • Answered on Dec 23, 2015 • 2,717 views
0helpful
2answers

Were can i buy the stand that orig came with the

Try Best buy they should have a universal stand if not try Tops Electronics in Haverhill ma
11/18/2009 12:08:10 AM • SVA-USA... • Answered on Nov 18, 2009 • 108 views
0helpful
1answer

I have a 1

Replaced the ROM chip controlling this area. Cost $1.98 plus an hours worth of labor. Purchased several extra ROMs for future use.
10/19/2009 5:04:25 PM • SVA-USA... • Answered on Oct 19, 2009 • 110 views
0helpful
1answer

TELEVISION POWER LIGHT TURNS READ, MAKES A COUPLE

check remote-control batteries, if not .there could be a problem with the tv power supply section.
10/13/2009 4:40:15 PM • SVA-USA... • Answered on Oct 13, 2009 • 237 views
Not finding what you are looking for?
SVA-USA HD4208TIII-PDP 42 in. EDTV-Ready Plasma Television Logo

99 questions posted

Ask a Question

Usually answered in minutes!

Top SVA-USA Televison & Video Experts

Marvin
Marvin

Level 3 Expert

85241 Answers

The Knight
The Knight

Level 3 Expert

76851 Answers

ADMIN Andrew
ADMIN Andrew

Level 3 Expert

53619 Answers

Are you a SVA-USA Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...