20 Most Recent Yamaha AX-596 Amplifier - Page 8 Questions & Answers

Short answer is no

https://www.youtube.com/watch?v=RywPcte_GqM

Hi Andrew Smith, as you comment, the problem would be in the remote control You can do a test to see if the remote control is broadcasting You put the camera of your cell phone focusing on the emitter of the remote control, press any key on the remote and through the camera you will see that the emitting LED turns on (this happens through the cameras of the cell phones detect infrared rays, our view can not do it directly) With this method you can check if they are emitting each key of the remote control If you don't emit, you can try cleaning the internal contacts Try to carefully disassemble the remote control Separate the plate and the rubber template from the keys, clean the latter with some neutral soap, removing the grease that forms in the contact area, on the other hand, clean the plate with a cloth dampened with a glass cleaner, NO USE ALCOHOL in any case, let all parts dry and reassemble Take the test and comment Greetings Franco Dosil Hola Andrew Smith, por lo que comentas, el problema estaria en el control remoto Puedes hacer una prueba para ver si el control remoto esta emitiendo Colocas la camara de tu celular enfocando al emisor del control remoto, presionas cualquier tecla del remoto y a traves de la camara veras que el LED emisor se enciende (esto sucedepor las camaras de los celulares detectan los rayos infrarojos, nuestra vista directamente no puede hacerlo) Con este metodo podras comprobar si estan emitiendo cada tecla del control remoto Siencuentras que no emiten, puedes probar limpiar los contactos internos Trata de desarmar con mucho cuidado el control remoto Separa la placa y la plantilla de goma de las teclas, limpia esta ultima con algun jabon neutro, sacandole la grasitud que se forma en la zona de contactos, por otro lado, limpia la placa con un pa?o humedecido con algun limpiador para vidrios, NO USES ALCOHOL en ningun caso, deja secar bien todas las partes y vuelve a armarlo Haz la prueba y comenta Saludos Franco Dosil https://europe.yamaha.com/en/products/audio_visual/av_receivers_amps/rx-v367/downloads.html

Hi Tony mucci, to connect your Yamaha EQ-70 equalizer to the RX-661, you must use two double RCA RCA cables and the Line IN connection of the EQ-70, you go to the RX-661 MD / CD-R Rec connection and the Line Out connection of the EQ-70 you go to the MD / CD-R Play of the RX-661 This equalizer will work with the analog audio signals, but not with the digital ones I hope you can connect it Greetings Franco Dosil Hola Tony mucci, para conectar tu ecualizador Yamaha EQ-70 al RX-661, debes utilizar dos cables RCA RCA dobles y la conexion Line IN del EQ-70, vas a la conexion Rec de MD/CD-R del RX-661 y la conexion Line Out del EQ-70 vas a Play de MD/CD-R del RX-661 Este ecualizador va a trabajar con las se?ales de audio Analogicas, no asi con las digitales Espero lo puedas conectar Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Yamaha-EQ-70-Service-Manual.pdf https://de.yamaha.com/files/download/other_assets/8/327618/RX-V661_G_en.pdf

(1)download yamaha rxv663 service manual. (2)read p.152-154 (3)make sure your remote matches with remote ID. how to check remote IR diode (1)switch on mobile phone camera (2)point it to remote IR diode. (3)Do not take any photo & press any remote buttons. (4)White light flash. how to check IR receiver (1)locate the front panel. (2)find out IR receiver. (3)find an analog multimeter with 0.5V selected. (4)black probe to ground, while red one to IR pin. (5)press any remote button. (7)deflection occurs

"My Yamaha receiver RX v575 will not power up it has a blinking red light when trying to power up "Never press power button more than 3 times. Your amp will be locked, otherwise.(1)Download RXV575 service manual. (2)Read P.25 to 29 to see if protection occurs.(3)Read P.31 and follow the diag steps.(4)If I protect, check all power transistors,two0.22Ohm resistors and biasing circuit such asall components connected to Q2022 of front L channel, on P.108.(5)If dc protect, check if DC comes out from speaker terminal, opening metal cover required.(6)If thermal protect, replace a thermal sensor.(7)If power supply problem, ps prt, check allpower supply circuits, including regulators andcaps.

Try this: https://seventrumpet.com/reset-yamaha-aw4416-digital-audio-workstation/

Hi Bryan Fenwick, if your Sky + HD Box-Wifi-2TB, has a unique audio output and is an optical type (Fiber Optic), you will not be able to connect it to your Yamaha CRX-D430, because it does not have such inputs , the fiber optic connection you have, is an output of the compactera You should buy an audio signal converter by fiber optic to audio signal, L R, with RCA Hola Bryan Fenwick, si tu Sky+HD Box-Wifi-2TB, tiene una unica salida de audio y es tipo optica(Fibra Optica), no vas a poder conectarlo a tu Yamaha CRX-D430, por que no tiene entradas de este tipo, la conexion de fibra ptica que tiene, es una salida de la compactera Deberas comprarte un conversor de se?al de audio por fibra optica a se?al de audio, L R, con RCA https://uk.yamaha.com/files/download/other_assets/2/325162/CRX-D430_B-1.pdf

In some old model av-amp, if the sampling freq. is 96KHz or above, av-amp confines its playback in 2 channels only. Check the sampling input source is 96KHz or not. Or perform this test (1)Download htr6130 service. (2)Start the self-diag test (3)follow the instructions written on p.25 to 33 to do the tests.

Hi Terry Fraser, for what you say, you could have problems in the speaker outputs or power supply Try disconnecting all the speakers from the back panel of your Yamaha and test if it does the same If you do, it is safe source and output failure If you don't, check all the cables and connections on the speakers well and reconnect one speaker at a time. Comment the results Regards Franco Dosil Hola Terry Fraser, por lo que comentas, podr?as tener problemas en las salidas de parlantes o fuente de alimentaci?n Prueba desconectar todos los parlantes del panel posterior de tu Yamaha y prueba si hace lo mismo Si lo hace, es seguro falla de fuente y salidas Si no lo hace, revisa bien todos los cables y conexiones en los bafles y ve re conectando de a un bafle por vez Comenta los resultados Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Yamaha-HTR-5890-Service-Manual.pdf

micro switch stuck on load tray door failing that check pin 21 yellow wire on connector

Hi Andrew D Souza, for what you say, your remote control has problems with the volume up key, try to disassemble it and clean the contact plate, with a little liquid clean glass, you will observe, as a accumulation of residue of rubber, on the contacts on the plate of the remote control, clean and dry very well DO NOT USE ANY TYPE OF ALCOHOL Let it dry very well, then assemble it again and see if it is solved Comment the results Regards Franco Dosil Hola Andrew D Souza, por lo que comentas, tu control remoto tiene problemas en la tecla de subir volumen, prueba desarmarlo y limpia la placa de los contactos, con un poco de liquido limpia vidrios, vas a observar, como una acumulacion de residuo de goma, sobre los contactos en la plaqueta del control remoto, limpia y seca muy bien NO USES NINGUN TIPO DE ALCOHOL Dejalo secar muy bien, luego armalo nuevamente y prueba si se soluciono Comenta los resultados Saludos Franco Dosil

Connect an HTMI cable to the leftmost (viewed from the back) HDMI jack to your TV's HDMI. Then connect the optical cable from the TV to the AV4 optical jack on the 573. You may need to configure your TV to use the HDMI jack you plugged into (if you have multiple HDMI jacks.) That should be all you need to do.

(0)Download yamaha rxv793 (1)read P.10-11 (2)follow the instruction to perform self diag test (3)or check DIR & DSP with an oscilloscope.

Hi Rex, what problem or what are you needing from the Yamaha RX-V683 Comment so you can find the best possible answer Regards Franco Dosil Hola Rex, que problema o que estas necesitando del Yamaha RX-V683 Comenta para as? poder encontrar la mejor respuesta posible Saludos Franco Dosil https://usa.yamaha.com/products/audio_visual/av_receivers_amps/rx-v683_u/downloads.html

No sound on all sources? Be sure you check all inputs (am/f.m., internet radio, hdmi sources, etc...)
If all sources fail and there is no sound, try a factory reset. Hold the"Straight" and "start" buttons, you should see the menu, then shut it off. If that fails, try a firmware update. (It needs to be online ofcourse). Go thru the menu and it will let you know if it has the latest firmware. Good luck

I can't get the external sub woofer to work Download RXV661 service manual and read p.96

Surround R + L + Center are wired in but won't work Voltage for all relay drive seems OK. What you should do is to exchange the front speaker relay with those suspected such as SR and center. If sound comes out, the problem must be relay. If still gets no sound, check all circled components. Remember to download service manual and read p.83.