20 Most Recent Yamaha HTR-5730 Receiver - Page 4 Questions & Answers

no channel to receiver

user guides fta files bin files and factory files are all free to download never pay for a fix! go to tvkeyz.com and join for free all the help u need is there ! if this helps please vote for me

If you are using a switch between the viewsat and the LNB, remove it and connect the receiver again.
If that did not work, remove the cable from the LNB and power up again; if the receiver still unable to power up then you might have a short circuit in the cable itself or water might be entrapped inside the connectors on the LNB/switch connections.
Let me know if you need further assistance.

Go to Yamaha website and download your manual from there. Ted10

check yhe fuse inside the unit?

go to tvkeyz.com

go visit tvkeyz.com their is help there, free chat and bin files user guids etc all for free

Your receiver is going into protection mode.
Need to know what type of reciever. In the self diagnostic mode there are code that will tell you why it is cutting off. If it is as you say you, as for the fall, you may just be able to reset it in diagnostic mode and everything will be fine. You can search for the service manual online. It will explain the diagnostics and the protection mode in detail.

It is going into protection mode. If you feel comfortable with directions look for the service manual and get the codes that are causing the protection error then you can find out how to fix it.

Thank you

THE SPEAKER WIRES ARE REVERSED.... On the receiver the red side is always positive and black is always negative.
change + to - or
change - to + on one or more speakers.
positive side--------------------negative side
red --------------------------------black wire
gold wirew/silver--------------silver wirew/gold
white lined----------------------non-white lined

join a fta forum. You will find a lot of info. You need to do a sat scan
good luck!

my box has gotten zapped and I need a file to fix it how do i get a new file

adjust your sound outputs with the remote and adjust the +/- settings on them and ten try another sound output adjust the stero effectsand try playing around with that and try cutting the speaker cable back about 2 inches and using a new peice of the cable to see if it's the cable causing the issue.

Go HERE to find all the info you need to fix your receiver.

try splicing your cables to the speakers back about 2-3 inches check all you componet cables to make sure they are all "all" the way in and re-wire the speakers into the jacks, cause anything mildy out of place can casue the other speakers to cut out

try another outlet sounds like you may have a short in either your power cord/supply or your outlet is acting up with the wiring

part of it more than likely is your power supply or outlet.
two the draw on your other componets could be shorting it.

You might try connecting only one speaker at a time and see if you can locate a bad speaker OR bad output channel that way. If you find that you connect one speaker and the problem occurs then try another working speaker and see if it still does it. If it does, then you have an output problem. Good luck.