20 Most Recent Toshiba e-Studio 350 Copier - Page 4 Questions & Answers

Follow the instructions on the copy machine screen and remove the paper.

clear very well the paper path especially if there is bridge who trasfer the paper to the finisher and check the sensor inside it or check if there is any load at the main motor

you have to tell the copier you've changed the toner, OR you didnt pull the tab on the cartridge a small white waxy paper tab with an arrow on it hope Ive helped Tosh Tech 23 yrs SC

A PM is like a tune up. it's a way that parts such as rollers with tephlon coatings and feed tires with tread can get looked at or replaced. The 350 was one of my favorites, being a work horse. The full blown PM will cost $3-400 but worth extending its hard working life. If you do go with a Authorized Toshiba dealer to do the work, listen to what the tech suggests, He doesn't make any more money if you say yes or no(trust me) to keep your service calls to a minimum keep up on your preventative maint. they are based on the amount of copies you or your staff have made. If you have been keeping up with them and you still see him(the tech) to much then you might need a bigger copier. {note you can't buy the e350/450 any more its been replaced by the 351 which is a little diff don't trade it in if you can still get parts ~~~like I said it's a workhorse! } hope this helps a little ~~~>Tosh tech for 23yrs SC

I think it is a tray error.

do Chang r a d f sensor

probably a broken drive gear at heat roller { fuser)

what are your que.

i cant know but 2 soloution here first you can change main board second you can transfer memory from other main board

i think cic unit connection loose OR damage chek it

you can check fuser unit gear break if break then replace it

you can open front cover then remove toner cartridge holdind move round cartridge then replace it

0+8 M/C. ON TYPE 251 & SET IT O

hello sir i am tahir from pakistan i have studio350 copier i have a problem in this machine . sir when start the copy button there is no print in the paper just white paper no on print . i replace the mother board , hvt board and power supply check lazer beam unit no self test is produced just white print . every thing is working properly how i can i do ?

in 08-400

It is better adjust in the developer unit by rotating 1thred both side of trim blade.

see whether toner is empty,

check scanner

Hi, It is at right of machine a big square box.