20 Most Recent
Toshiba TLP S30 Multimedia Projector Questions & Answers
How to the lamp works
Sorry we might not be able to answer that properly, you may want to rephrase the question. I don't know about these but someone might if they knew how to answer.
I have projector Hitachi cp-x608 he was work good
Select "Go to Advanced Menu..." on the menu, and press the arrow or ENTER button to use the menu of PICTURE, IMAGE, INPUT, SETUP, AUDIO, SCREEN, OPTION or NETWORK.
I also have the user manual for this projector. If you would like to have a copy, send me an email at
[email protected] I will send you the manual. It will help you to solve any other issues that may arise. Lawrence Brown
How to reset lamp hours
Supposedly the lamp has a chip that keeps track of the used time. The manual says to check in the instructions that came with the lamp. Others say that LG will not reveal how to do it. Perhaps you could ring LG service and give them your machine serial number and request that as the owner you want the correct information.
Reset lamp timer
If you go into the info menu you should see lamp hour meter, should be option there to reset it.
only do so if you have put in a new bulb as bulbs can explode if they go over the hour usage time.
---
Please dont forget to vote this answer was helpful
Many thanks
------
N o signal
Hi momawarbucks
Check if your secondary screen is attached by going to desktop and right click , then go to properties and advanced.
Also check if your refresh rate is on 60-70 Hz
And that the resolution your PC is on , is supported by your Projector - i.e. XGA Projector - 1024x768
Good luck and thanks for using Fixya !
Reset Lamp Hours Timer
This works on a couple different Toshiba models -- might work on yours...
Make sure the main power switch is OFF. Hold the "ON", "MENU", and "INPUT" buttons at the same time and turn the main power switch on. Keep them held until the yellow power standby light comes on, then let go. It is done.
I have a Toshiba TLP
If you let the lamp go all the way out, there is a chance that it took out a fuse when it went out. This would require you to get the unit serviced and it will not be cheap.
How do I take a projector apart
Thanks for your question!
I'm sorry that you haven't received an answer yet.
The response rate on FixYa FREE questions is usually over 80%, but sometimes questions go un-answered when:
1. the question is unclear, incomplete, or poorly worded...
2. the question is mis-categorized - so the correct experts aren't viewing it...
3. the question requires an answer for something that cannot be explained online adequately...
4. specific training, tools, or equipment are required to avoid injury or death...
5. the Experts that are online simply don't have the resources to answer your question fully...
Please feel free to re-work your question if you feel one of these may be the reason.
Of course you are not required - but converting your question to a PAID one usually increases the reply rate as well.
Normal rates for FixYa are...
$ 9.99 answer for one question.
$12.99 Live Real-Time online chat or premium e-mail support.
$29.99 Live Real Time phone support
Sometimes FixYa will run specials for unlimited questions via monthly subscription or reduced rates for limited periods.
Consider the savings that can be had when an informed Expert can save you a $100 service call, or a $350 trip to the car dealership.
Your problem solved - guaranteed! Or your money back!!
If you don't want to pay - feel free to re-submit your question so it returns back to the top of the work queue if you still need help.
Thanks for using FixYa - a 4 THUMBS rating is appreciated for helping with your FREE question
What bulb is needed to replace in the projector?
three green lights come on then the standby light goes red and remains on when the projector is plugged in. The lamp and fan do not come on when the power button is pressed instead the lamp light comes on red.
Not finding what you are looking for?