Top 20 Pentair MasterTemp high Performance Gas Heater 200 BTU () Questions & Answers

0helpful
1answer

My mater temp is only

No matter what the gas company says. If you are taking a menometer reading at the inlet to th gas valve, and you know that you have the proper lengths and diameter of gas pipe, And you have no flex pip on the gas line, then th gas company is wrong, and you need a larger regulator or a regulator adjustment.

Consult your installation manual to ensure you have the proper diameter gas line and so not use any flexible gas pipe .
8/19/2011 8:57:07 PM • Pentair... • 154 views • 0 helpful votes
0helpful
2answers

My Pentair Easy Touch system will come on randomly.

Sometimes its a simple Power Cycling that's needed. Fancy term for going to the outdoor pool panel, flipping all the breakers to off, counting to 10, then turning them back on again. Hope this helps
2/23/2023 11:50:52 PM • Pentair Pool &... • 88 views • 0 helpful votes
0helpful
1answer

Pentair master 400 controller will not respond to touch

Do you have an Easy Touch Controller?
12/19/2022 8:55:56 PM • Pentair Pool &... • 50 views • 0 helpful votes
1helpful
2answers

Pentair spa and pool control

Yes, the water must be circulating rapidly when the heater is on from being cold. Once hot, it can just circulate gently.
12/24/2022 3:16:46 AM • Pentair Pool &... • 42 views • 1 helpful votes
1helpful
1answer

Incorrect temperature reading on Pentair Mastertemp 400 pool heater

Sometimes it is best to call in the professionals who have the knowledge and tools to find problems.
11/2/2022 4:45:47 PM • Pentair Pool &... • 115 views • 1 helpful votes
0helpful
1answer

Pentair Mastertemp 250 occasionally gets error E05.

stack flue sensor heater overheated check gas pressure if ok sounds like occasionally low pressure if pressure ok check for burner tubes blocked
9/24/2022 3:53:41 PM • Pentair Pool &... • 207 views • 0 helpful votes
0helpful
1answer

My Pentair Intelliflo control panel is frozen I push buttons and nothing changes on the screen

What does the LCD Screen say? Does it say display not active?
10/30/2022 2:33:36 PM • Pentair Pool &... • 65 views • 0 helpful votes
0helpful
1answer
0helpful
1answer

Pentair Mastertemp 250 heater that turns on, but shuts off after about 30 minutes

make sure gas pressure is correct if too low it will overheat or possible blocked burner tubes
6/28/2022 5:57:33 PM • Pentair Pool &... • 267 views • 0 helpful votes
0helpful
1answer

Can you have check valves when you have a intelliflo vs+svrs pump 011017 ?

no country told (down under?) parts and manuals and things vary all over earth. well they did not lie to you, as it would damage the pump.\ but I see you are reading the wrong manual.. learn that systems of many kinds vary by model or submodel or version even not known by you. some even vary by build dates. or from upgrades ask them only or bad things can happen. Pentair Intelliflo Variable Speed Energy Efficient Pump VS+SVRS 3.2kW 3HP Max 230V swimming pool or spa? or what? not told, (all of it) nobody knows what you have there, for sure huge pools., all piping valves etc. why not call for a real service tech>? if down under ask them (Australia)???? not told https://www.pentairpool.com.au/en/185/Home/Products/Pumps/Filtration-Pumps/-/intelliflo-vs-6 this manual contradicts you , per page 2 3:Use a check valve in the discharge line when using this pump for any application where there is significant height (head) to the plumbing after the pump. 4.Be sure to install check valves when plumbing in parallel with another pump. This helps prevent reverse rotation of the impeller and motor.<<< damage. not told the application, wow, gee some pumps are below grade of pool, and is called HEAD, and with any far distance up, the check valve keeps the pool for draining to the pump area during service. (the same true on suction side a pump down to a deep well losing prime. NO APPLICATION TOLD at all no real answers possible blind
7/30/2022 8:22:20 AM • Pentair Pool &... • 60 views • 0 helpful votes
0helpful
2answers

Pentair pool heater keeps tripping breaker when i turn on

When you switch it on, watch the breaker trip. Does it slowly move to off? That is a lazy breaker and needs replacing. People use breakers as switches and they are not made for that, so they wear out. If the breaker snaps straight to off, you have a short to earth. Look for water around the electrics particularly at the pump. If you can't see anything obvious, call out a pool electrician to diagnose and fix. There are other ideas on the link. https://www.google.com/search?q=pentair+pool+heater+trips+breaker ..
6/8/2022 8:20:33 PM • Pentair Pool &... • 163 views • 0 helpful votes
2helpful
2answers

Pentair legend II pool cleaner,

From your description that is bad service Go online and google Pentair legend II pool cleaner hose swivels
6/15/2022 9:36:56 PM • Pentair Pool &... • 81 views • 2 helpful votes
0helpful
1answer

Pentair Mastertemp 125 clicking sound when trying to start. Doesn't start and just keeps clicking.

check to see if gas is on if ok check ignitor at start up
5/25/2022 6:59:02 PM • Pentair Pool &... • 132 views • 0 helpful votes
0helpful
1answer

I have a Pentair Prowler 920 robotic pool sweep-cleaner and the motor box filled with water, is it shot and need to be replaced or can it dry out and still work ?

You are the only one there. You can try dryng it out and see if it works. if it does good if not replace it. Personally I would Buy a new one and never look back.
4/21/2022 11:43:42 PM • Pentair Pool &... • 216 views • 0 helpful votes
0helpful
2answers

I have a Pentair easy touch control system, buttons not working

Question moved from Computers and Internet. Try the Reset. Right button: Press the Right button to reset system. The main screen will be displayed and communication will be established with the optional EasyTouch Indoor Control Panel if installed. Dec 5, 2007

Reboot Easytouch System?????? ' Trouble Free Pool

https://www.troublefreepool.com > ... > Everything Else
About featured ..
3/16/2022 9:03:23 PM • Pentair Pool &... • 555 views • 0 helpful votes
0helpful
2answers

Pentair Max-e-therm troubleshooting!?

If you're getting a service system light with the pump on full and good water pressure out of the jets, then you might have a problem with the pressure switch in the heater.
4/24/2022 4:37:14 PM • Pentair Pool &... • 83 views • 0 helpful votes
0helpful
1answer

Pentair Master Temp 125 gas valve "sticking"

Spray the plunger with Garage Door Lubricant. The warranty is a year, so try claiming on it. Add a few months to the installation date. You bought all the hardware including the heater, and then started digging the ground. The Applicable Warranty Period is one (1) year from the Purchase Date or 90 Days on the Heating Element. The warranty does not cover damage caused by improper water chemistry. The warranty will be void if the heater is not installed by a licensed technician, or the heater has been installed on a soft sided pool.

Pentair MasterTemp 125,000 BTU Low NOx Natural Gas ...

12/14/2021 5:03:37 PM • Pentair Pool &... • 161 views • 0 helpful votes
Not finding what you are looking for?
Pentair MasterTemp high Performance Gas Heater 200 BTU  () Logo

2 questions posted

Ask a Question

Usually answered in minutes!

Top Pentair Pool & Spa Experts

Jay Finke
Jay Finke

Level 3 Expert

1397 Answers

Brad Brown

Level 3 Expert

19187 Answers

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Are you a Pentair Pool and Spa Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Pentair Pool & Spa

  • Pentair Pool & Spa

Most Popular Question

mater temp only

  • Pool & Spa
Loading...